The iXS Eliott leather jacket is made of nappa leather Features Antiseptic polyester mesh lining Detachable thermal lining 3 outside pockets, 3 interior pockets on the thermal vest and 2 inner pockets in mesh lining Shoulder and elbow protectors WINNER® - meet the test standard EN1621-1 Preparation for a back protector
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
The perfect gloves for the everyday urban commuting. Maximized ventilation for the warmer days and certified safety combined with the unique Dainese style. Ride your own way on the streets of the city. Features Dainese Smart Touch on the index finger Reflective inserts Soft inserts on the knuckles Ergonomics Adjustable cuff strap Neoprene cuff Pre-curved fingers Materials Amica suede palm Breathable and elasticated fabric Temperature Perforated mesh fabric on the fingers and the back of the hand Performance Gloves certified to Cat. II - Pr- EN 13594 Standard lev. 1 Reinforced palm
strapazierfähiges Rindnappaleder anilin Innenhand aus Känguruleder Schoeller®-Keprotec®-Verstärkungen vorgekrümmte Finger Stretcheinsätze zwischen den Fingern und an den Seiten Sturzpads atmungsaktiv
Freedom was a keyword in the early days of motorcycling. The motorbikes of that time are now vintage, but there is something very beautiful about them that is (largely) lost: character. The Barstow combines vintage moto design with modern styling and technology, resulting in a timeless look. Features Frame: Minimal frame design works in union with distinct lens shape to increase visibility. Strap: Premium strap trim elevates performance and adds rich detail. Foam: Triple-layer face foam provides excellent moisture management. Lens: Anti-fog polycarbonate lens with integrated pins for seamless tear off application. Air intakes: Upper vents force air in and channel out moisture to reduce fogging. In the box Clear Lens. A sublimated microfiber bag.
€Lady Glove in short sizes made of leather and textile mix Features soltoTEX® membrane with Tri-fleece inner lining Palm made of Clarino with double layer of leather Stretch leather on back of hand Fingers with double layer of leather Wrist stretch adjustable with Velcro Width adjustable cuffs with Velcro fastener Safety: fulfill the requirements of the directive N° 89/686/EEC
