Held Murdock, textile pants

TS-BT35F01 3.5mm bluetooth Audio Transmitter Receiver A2DP Stereo Dongle Adapter for TV PC SubwooferThis is a High Quality 3.5mm bluetooth Stereo Audio Transmitter.It compatible withHi-Fi, PC, PSP,Nintendo DS, CD/DVD, lPod,lPhone, lPad, MP3, MP4, PDAs, PMP playerwith 3.5mm audio socket, enabling such devices to become bluetooth and you canenjoywirelessly with your bluetooth stereo headsets, receivers.Feature:1.Transmits high fidelity stereo music to bluetooth receiver device,enjoy the music without wire restriction.2.Connect to bluetooth-disabled audio device via 3.5mm audio plug,make it able to work with bluetooth A2DP headset/speaker.3.Plug and play, no need installation.4.Built-in rechargeable li-battery, can work for 5~7 hours after fully charged.5.Compact size, portable and lightweight.Specification:bluetooth version2.1+EDRbluetooth profilesA2DP / AVRCPFrequency2.4GHz~2.4835GHzEffective rangeup to 10mInput voltageDC 5VCharge timeApprox.2~3 hoursWork timeApprox. 5~7 hoursPackage Included:1 X bluetooth Audio Transmitter1 X USB Charge Cable1 X User Manual(English)

Racing Visor for Shark Helmets following
Race-R Race-R Pro Race-R Pro Carbon Speed-R
Not approved for road use
example picture

The combination of chic and fashion a touch "Bad Girl", this makes the DNA of the Joyce! outer material
buffalo leather Neoprene collar surcharge
Insulating material
Removable thermal lining
protectors
Shoulder protectors. Height-adjustable protectors on elbows Bag for back protector.
Comfort
Body Fit Jacket hem adjustable with buckle. Adjustment on the wrist. Padded seams on shoulders and arms. embossing 4 outer pockets 3 inside pockets

The Alpinestars C‐10 glove incorporates a hydrophobic textile outer and DRYSTAR® liner to keeps your hands dry while riding in the rain. Pre‐curved fingers and a knitted cuff ensure the glove is as comfortable as it is protective.
Features
Hydrophobic textile upper construction is lightweight and durable. Single layer, soft Goatskin palm construction provides abrasion resistance where it is needed the most. DRYSTAR® membrane insert is both waterproof and breathable, keeping the hands dry and comfortable. Over‐molded hard PU knuckle affords excellent impact protection. Additional protection provided by 4mm EVA foam padding on top of the hand and fingers. Pre‐curved finger construction reduces fatigue while riding. Accordion stretch inserts on fingers improves fit and comfort. Thinsulate® thermal insulation keeps hands warm.

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

MATERIALGewachste Baumwolle 8 oz. Versiegelten Miporex® Membran Gesteppte Baumwolle Check Futter auf Körper mit 100gr Polsterung Gesteppte Viskose Futter mit 60gr Polsterung an den Ärmeln Cord am Hals Kragen, Manschetten und innen Taillenband Abnehmbare weiche Protektoren an Schultern und Ellbogen SCHUTZProtektoren erfüllen die Anforderungen der Europäischen Richtlinie 89/686/EWG und der technischen Norm EN 1621-1:2012 TASCHENTasche für Rückenprotektor Oberen jettete Taschen, durch Metall-Reißverschlüsse geschlossen Unteren aufgesetzten Taschen, von Landeklappen und Druckknöpfe geschlossen Gerichteten Jet Innentasche, Spule tirette geschlossen FUNKTIONENVerstärkungen an Schultern Taille Justierbänder mit Schnallen seitlich Metall Verschnaufpausen unter arm Anpassung der Manschette Zwickel mit Druckknöpfen GRÖßEN: S-M-L-XL-2XL-3XL-4XL