Just1 Iris Kickflip Motocross Goggles, white-red, white-red, Size One Size

This is Grex’s mini-jet for children, designed for those looking for a helmet for their little ones with the Made in Nolan guarantee. Based on the solid Nolan N20 model, it is characterised in particular by a compact size and for the inner comfort padding which has been carefully designed for the particular conformation of children’s heads. Microlock retention system with micrometric adjustment. Also to notice is the versatility of this helmet, with the availability of two visors: one long visor in light blue, which protects the face from water and wind while still guaranteeing suitable air circulation inside the helmet, and a Smoke-coloured goggle-shaped visor (for daytime use only), created for the hotter and sunnier seasons.

Features
Innovative Press-Fit molded comfort liner system provides a smooth inner chassis for max comfort Adjustable waist buckle closure system Level 1 back protector constructed to reduce impact energy transmission Stone shield chest panel constructed with energy dispersing molded panels Strategically placed ventilation ports for cooling Refined fit for maximum deflector coverage Biofoam shoulder pads with fully integrated adjustable strap system for proper fitment Stone shield tested and certified according to European Standard EN 14021:2003 Back protector tested and certified according to European Standard EN 1621-2:2014

500 D Polyester Gewebe herausnehmbare Reissa®-Membrane: 100 % wasserdicht, 100 % winddicht, atmungsaktiv herausnehmbares Thermofutter YF-Protektoren zertifiziert nach EN 1621-1 an den Schultern und Ellbogen herausnehmbarer Schuam im Rücken SAS-TEC® SCL-19 Rückenprotektor zertifiziert nach EN 1621-2 nachrüstbar reflektierendes 3M Scotchlite ™-Material AirVent-Belüftungsreißverschlüsse 3 Außentaschen 2 wasserdichte Innentasche Verbindungsreißverschluss Sicherheitsnähte

Features:Fits models : CH13, CH14, CH15, CV13, CV14, CV15CV16.Specification:Name: CarburetorMaterial: MetalColor: SilverCarburetor Dimensions:Engine Opening O.D.:27.5mmBolt Hole Spacing:52mmNote:1.Please allow 1-3mm errors due to manual measurement.Package Included:1 X Carburetor

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Description:Gear shifting motorcycle riding shoe protector.Made of TPU, both durable and comfortable to wear.The shoe protector will protect your footwear from scuff marks or wear and tear caused by your motorcycle shifter.Using TPU soft rubber, wear-resistant, non slip can be adjusted according to the actual needs;Moderate thickness, comfort to wear, good anti-slip effect;Assist the shift operation without damaging the shoes, achieving a very good protection.Simple design, practical, compact, easy to carry.It is easy to wear and to care for.An versatile product, allowing you to switchyour footwear for different types of riding and still stay protected.Specification:Product Name: Moto Shoes Protector PadMaterial: TPU Soft Rubber, Antiskid BeltLength: 31cmColor: BlackSize: One size fits allNote:1. We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)Package Included:1 X Motorcycle Gear Shift Pad