Hilmor 120422 Centre Pin EL25EL32K3B

The Forgefix Nyloc Hexagonal Nuts incorporates a nylon component to effectively lock the nut into position on the bolt. The nylon component has a smaller inside diameter than the actual nut. This locks the nut in place by squeezing the nylon firmly around the bolt when tightened. Unlike a standard locking washer, the Nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened. The nuts are zinc-plated for increased resistance to corrosion. Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so. APPLICATION: Where a permanent fastening is required and loosening must be prevented by movement or vibration. Can be used on most bolt products including HT Bolts, Carriage Bolts, Threaded Rod etc. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Nyloc Nuts & Washers Zinc Plated M4 Forge Pack 50

Bahco ERGO™ Handsaw System Superior Blades has a wide selection of different blades to cover all common materials and applications, simple storage, easy handling and straight forward replacement of worn blades. Features a patented locking-in system. The blade has a low-friction, rust-protective coating. For use with the Bahco ERGO handsaw handle.Professional general purpose saw blade with very fine teeth for smooth sawing in a wide variety of materials such as plastics, laminates, wood, chipboard and soft metals like aluminium. Slim blade and nose for easy access. Low-friction, rust-protective coating. Length: 400mm (16 in). Teeth 15 tpi

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 5 years. Specification: Colour : Red Finish : Smooth Size : 400ml Coverage : 0.5m²/L

ABUS Diskus 26 series padlocks have a pin tumbler cylinder with anti-pick mushroom pins, a solid lock body which resists drill, pull & manipulation attacks, and a through hardened steel alloy shackle to resist saw attacks.'Deep Weld Technology' which offers maximum case strength. Where to use it: High security requirement in severe weather conditions The shackle is manufactured from hardened steel alloy and is protected in a stainless steel body. Key operated, key retaining (a key is needed for locking. Lock retains key until locked) The anti-cut plate provides 360 degree protection from sawing while a top quality welded seam secures against impact attack. Overall diameter: 71 mmOverall depth: 30 mm Shackle width: 19.5 mm I.D.Shackle height: 17 mmShackle Dia: 10 mm

Dobladora de tubos de alta resistencia de 180 grados Dobladora de tubos de 8 mm Tubo de cobre de 5/16 "Herramienta de doblado de tubos de aire acondicionado Herramienta de codo manual

Knipex 77 Series electronic diagonal cutter with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 57 HRC. Cutting Capacity: 77 02 ESD: Round Bevel Head, Hard: 0.60mm, Medium: 1.20mm, Soft: 0.3-1.6mm. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm. 77 42 ESD: Pointed Non-Bevel Flush Cut Head, Medium: 0.80mm, Soft: 0.3-1.3mm.Knipex 77 32 115 Electronic diagonal cutter with a pointed head and a small bevel, ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm.