Quickly Dry Pockets Board Shorts

Hama Kfz-Ladegerät, 1,2 A, Schwarz (00183261)

Paño de microfibra limpia parabrisas para manija larga Cepillo de limpieza para autos (verde)

Specification:1. Name: 12Pin bluetooth Adapter Aux Cable2. Model: A424783. Material: Plastic4. Connector: 12Pin5. Black: GND-6. Red: 12V ACC+7. Cable Length: approx.26cm8. Suitablr for Ford Focus/Fiesta/Monde.NOTE: This adaptor will only work with stereos that have the AUX button and NOT CDDJ stereos (the stereos with 6 cds built in).Feature:- Plug and Play, easy installation.- Function via bluetooth-enabled devices.- No functional limitations of the car radio.- Allows you to connect an external audio source.- It is possible from your smartphone to your car stereo to stream.- Pair your phone with our bluetooth module,and choose Aux from your radio.- You can enjoy music from your phone through car speakers.- bluetooth 5.0 system, and compatible with other versions of 2.0 3.0 4.0 bluetooth system, support commonly used MP3 format audio, but also support WMA WAV FLAC, and other high-quality audio format decoding, non-ordinary Bluetooth functions, can support DSD large capacity transmission.- The voice of music APP and map navigation can be transmitted to the car by bluetooth Phone. This can only transmit the sound to the car, but the image can not be displayed on the car.Installation:Red power cable connected to 12V+Black power cable connected to 12V-12Pin plug into the CD player Jack (please confirm corresponding socket), mobile phone is connected with the bluetooth module, aux audio source selection, you can play mobile phone music.Suitable for all mobile phone with bluetooth

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Uwell Crown 4 / IV Box Mod is powered by dual 18650 batteries and is capable of 200W max output. With unique baroque pattern design, the Crown 4 mod gives you great visual experience. The new Circuit Board provides you stable and safe vaping. In a word, the Crown IV kit is a wonderful vape kit that can satisfy great vaping experience and visual enjoyment for you at the same time. Zinc alloy+PC+ABS+aluminum construction Innovative SS904 TC mode New circuit board design Reliable performance and fast firing from the new PCBA of UWELL Powered by dual 18650 batteries with a 200W maximum output Power mode;TCR mode;SS904 TC mode working modes The sleek mod frame provides a comfatable grip TC range at 100-300

Potencia (W):80; Soporte de Lámpara:1156; Cantidad de LED:16; Color de la Luz:Amarillo; Dimensiones de Unidad / L x A x L (cm):5.61.81.8; Peso Neto (kg):0.018; Función:Faro Posterior,Luz de Freno,Luz de Direccional; Tipo de Chip: LED de Alto Rendimiento; Material:Aluminio; Voltaje de Entrada:12 ~ 24V