The ALM Manufacturing BD036 Spool Cover fits Black and Decker Reflex machines (single line models) - for models see BD032. Compares to 374746/01, RC-100, 374446-01, 5104183-01. Manufactured in the UK.
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.12.7mm.Key Type. 6mm hexagonal wrench
Bahco 1-106 series Hand files with Oberg cut are useful for all flat filing. The Oberg cut gives a high removal rate and smooth surface finish on most materials. The edges and surfaces are parallel. Surfaces single cut, bastard, with chipbreaking teeth. One edge single cut.Size 200mm (8in).
1 Bogen Epoxy-Sticker "Herzen", 27 verschiedenen selbstklebende Motive in verschiedenen Designs (Größe der Motive jeweils ca. 0,8 cm x 0,8 cm bis 3,8 cm x 2,6 cm), mit Relief-Charakter, Bogengröße ca. 15 cm x 10 cm. Anleitung: ▪ Den Sticker von der Trägerfolie nehmen ▪ Das Motiv kann nun auf alle glatten, staub- und fettfreien Untergründe wie Papier, Pappe, Glas, Acryl etc. aufgebracht werden.
