Used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an acurate fit we suggest you use the same screwsink from the Faithfull brand. The set of 4 contains sizes No 6, 8, 10 and 12.Cuts Size 10 Plugs (10mm)
The Monument 781T DIY telescopic adjustable basin wrench is designed for use when tightening or loosening nuts in awkward positions, particularly those underneath basins or baths. The teeth on the jaws will grip uneven shapes as well as pipes, hexagons, squares etc. The swivelling head allows access where fixed spanners will not operate. Extends from 25 - 43cm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 25 mmD = 20 mm 25/32in
Tacwise fine wire staple, commonly used for semi-industrial/DIY applications. This staple is thinner than 140 type and not so visible. Suitable for the Tacwise Z1-53, Z1-53l, Z1-53T, Z3-53, Z3-53L and the Hobby 53EL as well as the Arrow JT21, Rapid R53 and other brands taking the popular 53 staple.Size: 6mm.Pack quantity: 2000.
The Faithfull FAIPLANE912 is a 9.1/2 Block plane seated at 21º with a 42mm cutter width. The planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. Presented in a hinged wooden box. Cutter Width: 42mm.Overall Length: 160mm.
The Bahco Screwdriver for Pozidriv head screws. The double shape handle allows for optimum grip and maximum torque power. Permanent colour codes at both ends of the handle, for a quick identification of the tip. The blade tip is made from high performance alloy steel. Chrome plated and entirely hardened. Black finish tip for higher accuracy. The size and part number are laser branded on the blade for easier identification The Hexagon profile blade and bolster allow the use of a wrench for jobs that require more torque. The blade continues through the handle with no loss of hammer blow energy. Metallic cap gives protection during jobs requiring high impact. Conforms to ISO 8764. Colour coded for quick identification of tip type: Yellow: Slotted.Red: Phillips.Blue: Pozidriv.Green: Torx.Purple: Hexagon (Nutdriver).Bahco Tekno+ Through Shank Screwdriver. Pozi Tip PZ2 x 125mm.
