BUSCADOR Profesional Puncher de cuero giratorio alicates Ojalero Puncher Heavy Duty Agujero redondo Herramienta de perforación para la correa de cuero Reloj Correa de banda Zapato Tarjeta de papel

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

The FatMax technician's bag has a rigid waterproof plastic bottom, and an ergonomic rubber grip handle. It has a removable divider and provides easy access to the tools. It is constructed from heavy-duty 600 denier nylon, and has a comfortable heavy-duty shoulder strap. Industrial leather reinforcements in key stress areas. It measures 28 x 29 x 38cm.

High sanding capacity, little clogging and long service life guaranteed thanks to corundum abrasive grit and full bonding with artificial resins. For universal use on virtually all materials. Perforated, for use with perforated sanding pad and dust extraction, hook and loop fastening.

SBS80 series metric sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome-plated finish. 1/2in square drive.Size: 8mm.

These Faithfull Multi-Functional Tool Bi-Metal Flush Cut TiN Coated Blades offer high performace and have a durable titanium coating to harden and protect the cutting and sliding surfaces, providing an improved performance and a longer working life. Compatible with many multi-function oscillating power tools.This high speed steel, bi-metal blade features milled and side set teeth for a fine straight cut in hard and soft woods and will cut copper and aluminium pipes, sheet metal and plastics. Width: 32mm.

Filamento PLA 1.75MM Filamentos de impresión 3D para impresora 3D 1 KG 1 carrete