O`Neal Matrix Wingman Handschuhe Weiss Orange 2XL

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Outer shell
750 D Tactel material from DuPont Contains non-textile parts of animal origin
Lining
mesh lining (100% polyester)
Membrane
detachable waterproof, windproof and breathable HUMAX Z-liner® inner (100% polyester with 100% polyurethane coating)
Fit/features
3 external pockets air-vent zippers large stretch panels in the thigh, knee and calves for a perfect fit waist belt elasticated waist PITTARDS® leather anti-slip seat patch
Protection
optional hip protectors EN 1621-1 CE-approved height-adjustable SAS-TEC® 3D knee protectors reflective sections Connecting zip

Specifications:- Color: White with Black, Black with Orange, Black(Option)- Material: ABS (Acrylonitrile Butadiene Styrene)- Filter Material: HEPA- Power: 120 W- C igarette lighter Length: 5m- Size: Approx. 39 x 11 x 9cm / 15.35 x 4.33 x 3.54Features:● WetDry Using● HEPA FILTERS EFFCIENTLYDouble filtration, and detachable that can be washed repeatedly.● STRONG SUCTIONHigh vacuum density, strong suction force, easy to solve the problem of garbage in the car, to make the car environment healthier.● Mechanical damping noiseHeat dissipation, make it work steadily, low noise, durable to use.● Different nozzles with different requires● It is suitable to clean the upholstery of the car, or the suede seat cover, the trunk carpet and so on.Package Included:- 1 x Car Vacuum Cleaner- 1 x EVA Flexible Pipe- 1 x Suction Nozzle- 1 x Elliptical Brush- 1 x Brush Connector- 1 x Flat Nozzle Joints- 1 x C igarette Lighter Power Supply Cable- 1 x Manual

Mit einer Fiberglas-Schale eine komfortable, abnehmbar und waschbar Innenfutter, abnehmbare und verstellbare Backe, es kommt ohne Visier, aber ruft eine Lederband für die Brille (Gläser und Motorrad Masken). Leicht und bequem, wird Sie dieser Jet mit Vintage-Design eine schöne Herstellung Helme ansprechen. 2 Schalengrößen erhältlich.ZERTIFIZIERUNG: Jet E22-05GEWICHT: Über 1000 gSHELL-ZUSAMMENSETZUNG: FiberglasKINNRIEMEN: Mikrometrische Kinnriemen SpindSTANDARD-VISIER: Anti-Kratz CristalINNEN: Abnehmbare, verstellbare und waschbare Innenfutter. Für Gläser geeignet und kompatibel mit Bluetooth-Kommunikation-kit

Germot Varese, textile pants waterproof

Description:1.Fashion, and convenient2.High-density engineering plastics, durable3.Can be used to place rubbish4.Aso can be used to place wallets, cell phones and any other small things5.Fixed with a removable hook and double faced adhesive tape, and it could be hung in proper location in the car6.Easy to fetch the upper part of garbage bin to clean the rubbish Specification:Material: PlasticColor: Black,Blue,SilverPacakage Included:1 x Car Trash Can