Bosch BT150 Tripod

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 8 years. Specification: Colour : Yellow Finish : Smooth Size : 2.5L Coverage : 5m²/L

Caja protectora de carcasa de carcasa de aleación de aluminio para Raspberry Pi 3, Pi 2 y B + con ventilador de refrigeración

This Forge Auto Gate Latch will automatically latch when the gate is pulled to the closed position. Ideal for gates in fields where easy access is preferred over security. Also used widely for garden gates. Supplied with all fixings and fitting instructions. Fitting Instructions:1. Position the keep on the fence post and mark the fixing holes with a pencil. Drill pilot holes with a Ø2mm drillbit and fasten in place using screws provided.2. with the gate closed, position the latch arm so that it is engaged in the lock and screw into position using the fixings supplied.Finish: Black Powder coated.

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

Interchangeable heads for Pipemasters irons.1 x Antex 22mm Heads Only for Pipemaster V00225

Quantity:1; Theme:Holiday,Birthday; Type:Dreamcatcher; Material:Feather,Alloy; Shipping Weight:0.1; Net Weight:0.04; Listing Date:09/02/2021; Production mode:External procurement; Size:1860