12V Car 5 LED Warning Rear Tail 3rd Third Brake Stop Light High Mount Lamp Red

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Kurzinfo: TomTom GO Essential - GPS-Navigationsgerät - Kfz 12,70cm (5"") Breitbild Gruppe GPS-Receiver Hersteller TomTom Hersteller Art. Nr. 1PN5.002.10 Modell GO Essential EAN/UPC 0636926101301 Produktbeschreibung: TomTom GO Essential - GPS-Navigationsgerät Produkttyp GPS-Navigationsgerät Display 12,70cm (5"") Farbe - 480 x 272 Pixel - Breitbild Empfohlene Verwendung Kfz Vorgeladene Karten Dänemark, Schweden, Norwegen, Italien, Finnland, Schweiz, Österreich, Spanien, Portugal, Belgien, Irland, Frankreich, Deutschland, Luxemburg, Niederlande, Andorra, Liechtenstein, Slowenien, Griechenland, Tschechische Republik, Monaco, San Marino, Vatikanstaat, Gibraltar, Polen, Großbritannien und Nordirland, Türkei, Ungarn, Slowakei, Serbien, Kroatien, Estland, Bulgarien, Makedonien, Lettland, Rumänien, Montenegro, Litauen, Albanien, Bosnien-Herzegowina, Russland, Malta, Belarus, Moldawien, Ukraine, Island, Kanalinseln, Kosovo, Zypern, Faroe Islands Schnittstelle USB, Bluetooth, Wi-Fi Integrierter Arbeitsspeicher

Diamètre [mm]: 228; Gamme de produits: Dual-mass flywheel; Code moteur: ALE; VW: GOLF IV 1J1,POLO 9N_,POLO 6R, 6C,GOLF III 1H1,NEW BEETLE 9C1, 1C1,BORA 1J2,GOLF III Cabriolet 1E7,GOLF Mk III Descapotable 1E7,NEW BEETLE Descapotable 1Y7,GOLF III Variant 1H5,BORA Ranchera familiar 1J6,GOLF IV Variant 1J5,PASSAT 3A2, 35I,POLO CLASSIC 6KV2,VENTO 1H2,PASSAT Variant 3A5, 35I,POLO Variant 6KV5; AUDI: A3 8L1; SKODA: OCTAVIA 1U2,OCTAVIA Combi 1U5; SEAT: IBIZA IV 6L1,IBIZA V 6J5, 6P5,LEON 1M1,IBIZA II 6K1,IBIZA V SPORTCOUPE 6J1, 6P1,TOLEDO II 1M2,CORDOBA 6K1, 6K2,CORDOBA Vario 6K5,TOLEDO I 1L; 038105266AQ, 038105266BC, 038105266BC, 038105266BC, 038105266B, 038105266BC

Barre/montant: Balancier; Côté d'assemblage: Essieu avant droit; Filetage extérieur [mm]: M12x1,25; Longueur [mm]: 78; Nombre de pièces nécessaires: 1; MITSUBISHI: PAJERO III V7_W, V6_W,PAJERO IV V8_W, V9_W,PAJERO II V3_W,PAJERO III Todo terreno, abierta V6_W, V7_W,PAJERO CLASSIC V2_W; 4056A105, MR374522; Biellette De Suspension,Entretoise/tige, stabilisateur

The AIRMADA™ brings track level specs to the mid-price helmet category. Unique manufacturing processes allow for a significantly reduced shell size, thereby reducing both weight and drag. Its long-oval headform, a first in this category, offers a race fit while eliminating pressure points. The AIRMADA™ is an optimal choice for those wanting maximum performance at an attainable price.
Do musicians know a song is going to be a hit when they are making it? Did we know people would be obsessed with the Sauvatage graphic when we originally released it? The answers are yes and of course. We knew you’d love it, want it, need it, and when it was no longer available, make crazy offers to get one of your own. The AIRMADA Sauvatage Deux is the banger you’ve been hounding us for. Features
Injection molded polycarbonate shell for strength and durability Sublimated Hydradry™ moisture wicking liner Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.
Fit The head is long front-to-back and is narrow side-to-side. This shape offers additional forehead room for those who find that most helmets have pressure points in the forehead. Venting 6 air intakes and 4 exhaust ports combined with deep channeling in the interior energy absorbing EPS foam keeps your head cool, reducing rider fatigue. Weight A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style. Exterior The Airmada fits extremely close to the head by virtue of its low profile shell. Additionally, the Airmada features a recessed twin-channel supervent with integrated spoiler to reduce helmet buffeting at high speeds. Shield The Rapid release shield removal system allows you to swap the fog-free Icon Optics shield in the blink of an eye. This cutting-edge system allows you to select the right shield for the conditions, all of which produce unrivaled distortion-free line of sight for what lies ahead. Interior The energy absorbing EPS foam liner uses our rider-preferred longer oval head form for a personalized fit without wasting an ounce of space. Combine that with superior venting, removable breath deflector, and a washable Hydradry moisture wicking interior creates a nearly perfect rider-focused enclosure. Once on you may never want to take it off.
This helmet comes standard with a clear visor.

Hauptmerkmale Design Handy-Gerätetyp Handy/Smartphone Vorgesehene Verwendung Fahrrad / Auto Produktfarbe Schwarz Material Aluminium, Komposite Gerätemontagetyp X-Grip Kompatibilität Apple iPhone X, iPhone 8, iPhone 7, iPhone SE, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch Google Pixel Samsung Galaxy J3, Galaxy S7, Galaxy S7 Edge Befestigungsart Saugnapf Multimedia Eingebaute Lautsprecher Nein Systemanforderung Einstellbare Breite Ja Höhenverstellung Ja Energie Energiequelle Nicht unterstützt Gewicht & Abmessungen Breite 82,5 mm Tiefe 22,2 mm