Macna Vosges Night Eye, textile jacket waterproof

RX-7V Ventilation New diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops of the new diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions, closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Shell Construction: PB-SNC2 Peripherally Belted Structural Net Composite Arai´s proprietary (super fibre belt) Peripheral Belt, borrowed from our F-1 technology, maximizes shell strength and flexibility while maintaining low weight. Positioned across the top of the eye port, this band allows the use of a thinner EPS liner which greatly enhances the upward field of view – especially appreciated in a full racing tuck! The Structural Net Composite adds a physical bond to the resin bond of the many layers of fibres and reinforcing materials within the shell. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Ventilation: Eyeport Airchannel Enhanced air exhaust from the eye port area, pulled through dedicated air channel to side ducts, improving efficiency and reducing noise. Front Ventilation: Center top vent The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions, closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. Front Ventilation: Diffuser system The new diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops of the new diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions, closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Front Ventilation: Brow vents extended to temple area Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Pull Down Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable. Aerodynamics: Patented Air Wing® adjustable MotoGP tested and designed to greatly reduce drag, turbulence and buffeting resulting in more comfort and additional top-speed. It improves stability of the helmet at high speeds or when braking hard and reduces noise. Depending on the model the Air Wing is adjustable in five different angles of attack positions to suit every riding position. Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: Pinlock insert lens included Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Neckroll Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: 5mm ’’Peel Away’’ Temple pad Arai´s peel-away temple crown pads give the option of 5 mm more interior with* if needed. Comfort: Emergency Release System (ERS) Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury. Comfort: Breath guard Works in conjunction with the dual-pivot® chin vent to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from the inside surface of the shield. Comfort: Chin Curtain Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Approval: SNELL M2010/2015 The American SNELL Memorial Foundation is an independent organisation, SNELL M2010 is their latest new, more shock-absorbent standard. For the M2010 standard a steel ball shaped rather like a tennis ball anvil is used, they also test with flat and “kerb” shaped anvils). The impact test area of SNELL is larger than that of ECE. Multiple impacts and a penetration test on random spots are used. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.

The Outback 3 Ladies Jacket carries the well-known feminine cut that all women s jackets from REV? IT! distinguished. In addition, the characteristics of the woman both in daily commuting and on a multi-day tour needed. In addition, it meets all basic requirements for a carefree journey under changing weather conditions: protection, ventilation and plenty of storage space. The thermal lining and waterproof hydratex® | Mesh G-Liner lining mean dryness and warmth in adverse weather conditions. Many VCS vents, various adjustment options and SEEFLEX Level 2 shoulder and elbow protectors complete the Outback package. Equipment options include the SEESOFT Level 2 Back Protector, the Challenger Cooling Vest and the Neon Connector Safety Vest. Outer garment
polyester 600D polyester ripstop Softshell 3L
Isolation
removable thermal lining
Lining
hydratex® | mesh G-liner removable
Features
SEEFLEX Level 2 protector SEESOFT Level 2 back protector insert type RV normal shape tour-fit laminated reflectors laminated reflective logo FLEXIsnap adjustable closures adjustable strap VCS | panels VCS | zippers collar fixation prepared for the Challenger cooling vest 3D mesh protector pockets zipper at the cuffs Storage bags membrane pocket napoleon pocket inside pockets

The KLIM Traverse line of completely waterproof, extremely durable and functional off-road outerwear is the benchmark in all-conditions comfort. Still unmatched in the industry, Traverse is the one solution trail and dual-sport riders can count on to deliver the most enjoyable ride in the most miserable conditions. This generation of the Traverse receives an intelligent redesign to match the off-road legacy of our Dakar lineup’s improvements including a refined fit, updated reflective materials, and intelligent ventilation system improvements. As durable as ever, better fitting and with an increased comfort range, the Traverse is designed to take the threat of rain out of your riding equation. Ride all day, any day, every day in absolute dry comfort. Weatherproof/Durability
Gore-Tex® 2-layer performance shell technology Guaranteed to keep you dry® Passes gore-Tex® on-road motorcycle test (remains waterproof at highway speeds) Main body durable nylon 66 shell 500d cordura® reinforcements on shoulder and top of the arm Two-way heavy-duty ykk® center-front zipper covered by external storm flaps
Ventilation
Two adjustable forward-facing chest vents Two adjustable slanted back vents Two adjustable forearm vents Adjustable velcro cuffs
Features
2 zippered hand pockets 1 internal zippered chest pocket Protection Shoulder, elbow and back pad pockets Compatible with D30® t5 level 1 & level 2 shoulder, elbow and back pads (not included) Chest protector and elbow guard compatible Tonal reflective material
Comfort
Moisture-wicking mesh liner Articulated sleeve profile for comfortable rider positioning Glove-friendly zipper pulls Adjustable collar Adjustable bottom hem Soft micro-fleece-lined collar

Do you always find it so a fiddle to put on your textile pants over your normal trousers? Do you drive a lot of commuting? Then the Swift is for you! Thanks to its smartly positioned zipper on the side, you can easily put on the pants to protect and dry at work or at home! Features
Made of Poly 600 and R-tech Fixed Raintex membrane so you always arrive dry at your destination Safe Tech protectors on the knee Side Eye boosts your visibility in the dark

The revolutionized Tech 7 MX boot incorporates innovative materials and technology in a completely new design for a lighter, more anatomically profiled performer. This CE certified boot promotes core stability and flex via a biomechanical pivot while offering excellent ankle protection. The boot chassis has been designed to give complete feel and optimized interaction with bike controls, while the innovative buckle system allows easy, precise closure. Features
Boot chassis designed with an ergonomically profiled forefoot and lower toebox to provide easier shifting and improved rear brake feel and control. Incorporating an innovative one-piece injected dual compound foot shell with coinjected hard toe protector and integrated steel shank. The shell is highly resistant to abrasion and impact, adds to the boot’s overall durability and improves boot’s streamlining. New dual compound sole is seamlessly integrated into the base structure for superior durability, high performing rubber grip patterning, and feel. The sole and footpeg insert are replaceable. Upper constructed from innovative microfiber material that is flexible and abrasion resistant. Upper material is reinforced with PU for high levels of water-resistance and durability and improved weight-saving performance. Material ensures consistent fit even for long term usage and is easy to maintain and clean. Contoured calf protector plate is injected with high modulus polymer for impact resistance and incorporates Alpinestars’ developed blade flex systemfor greater precision control and movement, added protection for heel and Achilles tendon and helps prevent hyperflexion. New TPU ankle protection system incorporating a biomechanical link between the middle and bottom sections of the boot helping prevent damage to the leg by providing progressive force relief for torsional forces. Alpinestars developed TPU shin plate and medial protection are constructed from one single part for greater structural integrity and stability. The anatomically profiled shin plate features a dual closure system with an internal microfiber flap attached with Velcro® for a precise fit closure while the rugged and durable shin plate attached securely with a precision adjustable buckle. The TPU medial side panel incorporates an advanced honeycomb rubber insert and is designed for excellent grip against the bike while guarding against impact. Wide entry aperture for convenience and allows broad ranging calf fit adjustment and support. Innovative buckle closure system includes high-impact aluminium bridge closures, with memory settings and a quick release/locking system with self-aligning design for easy, precise closure and improved riding performance. All buckles are replaceable. Redesigned instep and Achilles accordion flex zones construction for superior comfort, control and support. Extended microfiber gaiter helps prevent excessive water and dirt entry. Internal lining includes anti-slide microfiber suede on the heel to help keep foot in position. Soft foam reinforcement on ankles and collar for long lasting comfort and shock absorption. New, dual compound, removable anatomic footbed includes EVA and Lycra top for comfort and support ensures even weight distribution and reinforced heel.

FOX Legacy Flexfit Hat Faire partie d’un héritage fier avec le chapeau de Fox Flexfit Legacy ! La perfection de cette PAC est dans sa conception simple : toile monochrome, mis en évidence par le légendaire logo Fox Head dans le centre. Tout le reste serait superflue.fonctionnalités : Collection héritage Flexfit pour hommes Conception de l’étirement-to-fit Profil moyen Projet de loi courbe naturelle Broderie plate sur le panneau avant et latéraux