The Faithfull traditional lead dresser manufactured from straight grain seasoned Beech timber. It has rounded corners and a raised handle grip to give plenty of knuckle room when hammering or shaping a large range of ductile materials. Weight: 375g.Face Dimensions: 50 x 170mm (2 x 6.3/4 in).
The Makita HM1317C Demolition Hammer offers high durability and excellent demolition performance. Suppression of motor speed during no-load reduces vibration of the tool body. The unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. Supplied with: 1 x Bull Point, 1 x Side Handle and 1 x Carrying Case. Specification: Input Power: 1,510W No Load Speed: 730-1,450/min Impact Energry: 21 Joules Shank Size: 30mm Hex Weight: 17kg Vibration Chiselling: 8.5 m/sec² Vibration K Factor: 1.5 m/sec² Noise Sound Power: 101 dB(A) Noise Sound Pressure: 81 dB(A) Noise K Factor: 2.4 dB(A)
1/4 "SAE Aire acondicionado Refrigerante Abrelatas CA Puede tocar la válvula de la botella Puede tocar la válvula Válvula de la compuerta Válvula de cierre de la válvula de retención
Rapid No. 13 precision cut fine wire staples are made from high-performance stainless steel for strength and durability. The thin wire makes the fixed staple almost invisible, ideal for craft and textiles where the staple will have minimal effect on the fibres. Stainless steel wire classification class 2 AISI 304 ideal for outdoor use or use in humid areas. Type: 13 (stainless steel).Size: 6mm leg lengthQuantity: 2,500. For use with the Rapid MS610, R13, R83, R23, R30, R33, MS813, R19, ESN113 and R213 tackers.
Powdered chalk for refilling chalk line reels.Food Grade Calcium Carbonate Chalk, colour fast and resistant to damp conditions. The twist lock cap on the container makes it easy to use.Colour. Blue for all round interior and exterior use.Size. 2.5lb/1kg
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.0mm (5/32 in)
