Stanley Professional Glue Gun Kit 240v

Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 8mm (5/16 in).

E-Magnets Shallow pot magnets are low profile for applications where height is limited. They have a clearance hole through and a countersink on the magnetic face to accept a countersunk screw. Maximum operating temperature: 500°C.Material: AlnicoThe E-Magnets 827 Shallow Pot Magnet has the following specifications: Diameter: 29mm (1.1/8 inch). Height: 9mm (11/32 inch). Maximum Pull: 5kg (11 lb).

Master Lock classic brass padlocks are a tough and reliable security solution. The solid brass body has a modern diamond shaped design and a brushed finish. The extensive range of brass padlock options means there is a Master Lock brass padlock for just about any need. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) is also available. Padlocks are available with 4-pin, 5-pin or 6-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Gates, containers, storage units and sheds.The Master Lock 150EURT has the following specifications: 2 x 50 mm solid brass padlocks - 25mm hardneed steel shackle, 7mm diameter - 5-pins - keyed alike

These Zarges Aluminium Loft Ladder, two and three section aluminium loft ladders are available. With D shaped rungs for maximum comfort, and a universal stowing pole. The three section model comes with a hand rail. Easy to assemble and fit and supplied with instructions. Conforms to EN 14975 standards, 150 Kilo rating.No of sections: 3.Floor to floor height: 2,133 - 3,000mm.Floor opening size: 381 x 400 - 463mm.Minimum loft clearance arc: 710mm.Minimum storage length: 1,120mm.

Traditional style white plastic dimmer switches.Available in 1 or 2 gang.1 Gang dimmer switch for loads up to 250 Watts

The Porta-Nails Angled Nailer has a lightweight, durable design. To guarantee that the nails are set properly each time, the ratcheting ram allows for single or multi-hits. The multi-hit function helps to minimise fatigue whilst providing greater impact. Interchangeable shoe attachments (not included) provide multiple flooring options. The nailer is supplied with:Extension handle.Mallet.Angled shoe for 5/8in - 33/32in tongue and groove flooring.Wrenches.Rugged carry case. Specification Fastener capacity: 100 x 16 Gauge 'T' Cleats.Operating pressure: Manual.Dimensions: 387 x 457 x 76mm.Weight: 3.63kg.Porta-Nails Angled Nailer With Mallet In Case.