Held Clip-in Air Vest, airbag vest

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Ready for the serious work? The Equator does, because with its ventilation panels, separately removable thermo lining and Raintex membrane, the jacket is easy to adjust to the circumstances in which you drive! In addition, it is equipped with various reflective elements (also available in Night Eye) so that you are clearly visible and the jacket is packed with unique Macna specifications! Features
3-layer system with removable Raintex membrane and thermal lining Reflective elements on the chest and back Safe Tech protection on the shoulders and elbow, back protector prepared Vision vest prepared Ventilation panels on the chest Vential zippers on the forearm Ventilation opening on the back so that the wind can blow through the jacket Coat hanger Adjustable straps on the arms to create fit to your own body Easy cuff light Short connection zipper
* "brighter view" represents the night-eye effect

SPIDI Touring Rain Kit: Technical motorcycle product for rain protection. Safety
Maximum permissible speed 130km / h
Comfort
Waterproof clothing
Performance
Packable compressible
Ergonomy
Adjustable waist closure
Material
Areas in reflex material for detection at night Polyurethane nylon fabric

Specification:Product Name: Weed Eater Spool Line + Trimmer CapMaterial: PlasticMetalSize:MPN: 385022-03Color: BlackOrangeType: Trimmer Spool LineQuantity: 3pcsFitment:For BlackDecker:NST2018 Type 1 18 Volt 12 Cordless For GRASS ForHOG Trimmer / EdgerNST2018 Type 2 18 Volt 12 CordlessForGRASS ForHOG Trimmer / EdgerCST1100 Type 1 9 Cordless Trimmer EdgerCST1100 Type 2 9 Cordless Trimmer EdgerCST1200 12 Volt 10 Cordless Trimmer / EdgerGH600 Type 1 14 Automatic Feed Trimmer/EdgerGH600 Type 2 14 Automatic Feed Trimmer/EdgerGH600 Type 3 14 Automatic Feed Trimmer/EdgerGH600 Type 4 14 Automatic Feed Trimmer/EdgerST7700 13 Automatic Feed Trimmer/EdgerNST2018L Type 2 18 Volt String TrimmerST6600 Type 1 13 String TrimmerST7000 Type 1 13 Trimmer / EdgerCST1000 Type 1 Cordless String TrimmerCST1000 Type 2 Cordless String TrimmerCST1000 Type 4 Cordless String TrimmerCST1000 Type 3 Cordless String TrimmerCST1000 Type 5 Cordless String TrimmerCST2000 Type 1 12 Inch Cless String TrimmerGH400 Type 1 12 String TrimmerGH400 Type 2 12 String TrimmerGH400 Type 3 12 String TrimmerGH400 Type 5 12 String TrimmerGH500 Type 1 12 String TrimmerGH500 Type 2 12 String TrimmerGH500 Type 3 12 String TrimmerGH500 Type 5 12 String TrimmerGH500 Type 6 12 String Trimmer74526 Type 1 14 StringTrimmer78354 Type 1 9 Cordless Trimmer / Edger78354 Type 3 9 Cordless Trimmer / Edger78354 Type 4 9 Cordless Trimmer / EdgerNST2118 Type 1 18V String TrimmerGH610 String TrimmerLST220 Type 1 20V String TrimmerLST220FC

Features
Advanced Polycarbonate Composite Engineered Shell: Lightweight and tough. Fully-adjustable, aero-tuned visor: Reduces lift at high speeds. Ventilation System: Large intake manifolds and aero-tuned rear vents maximize airflow through the helmet. Large Eyeport: Fits all goggles and provides maximum visibility. Strap Grip: Keeps goggle strap in place. Padded Chin Strap with KwikWick™ material: Comfortable and secure. Closing chinstrap by double D ring.
AIRFIT Concept® Airfit™ permits a rider to personalize helmet fit through air adjustable cheek pads with additional noise reduction.Only by SCORPION EXO! KWIKWICK2® Liner Very effective, hypoallergenic, removable, machine washable, and very soft and pleasant to the touch, the KwikWick2® lining of the new ScorpionExo® 2011 range is a real custom-made slipper for your head.

Feature:2PC Red Loud Compact Electric Blast Super Tone Hella Horn for CAR/TRUCK 12V D4G1.This is for a set of two (2)horns for 12V systems.These horns use a standard blade connector on the back.Rated at 118dB, these horns are nearly 7X LOUDER than a stock horn (@ 96dB)Each horn has a diameter of 123mm (4.8).Ideal for all types of vehicles.Feature of disc-style horn.High volume.Specification:Material: MetalVoltage: 12VCurrent: 4APower Consumption: 2 x 66WLoudness: 105~118dBFrequency(High Tone): 40020HZ(High)Frequency (Low Tone): 33520HZ(Low)Fitment: Universal for motorcycles, cars, trucks, etcDiameter: 123mm (4.8)Color: Black, blue, green, silver, redPackage Included:2 X Horn1 X Relay