50 piezas de disco de tierras raras de 9x3 mm N40 grado imán fuerte de neodimio artesanía magnética de hierro

These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.Size 36mm

These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw Zinc Plated M10 x 30 Bag 10

Contains 1 off each of 1/2 in SD hex sockets - 5, 6, 7, 8, 10, 12, 14, 17 and 19mm.

This Surform® will plane all types of wood, aluminium, copper, plastic and laminates.It has a polypropylene handle and die-cast body for strength and durability and is fitted with a standard cut 250mm (10in) blade.Overall length 315mm (12in).

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

Style:Antique; Finish:Antique Brass; Faucet Type:Shower System; Number Of Handles:Two Handles; Flow Rate:1.8 GPM (6.81 L/min); Cold and Hot Switch:Yes; Valve Type:Ceramic Valve; Overall Height:1280mm (50.39); Showerhead Width:Diameter 203mm (8); Faucet center(Inches):18-21; Handshower Material:Brass; Faucet Body Material:Brass; Shower Arm Included:Yes; Handshower Included:Yes; Valve Included:Yes; Installation Holes and Handles:Two Handles Three Holes; Shipping Weight:4.389; Net Weight:4.9; Listing Date:01/20/2011; Special selected products:hot