A glove that clearly states your intentions! Outer garment Goat leather Comfort Cuff fastening Short cuff Stitching Palm reinforcement Lining Polyester Lining
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows. OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471 CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet. INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part. INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation. The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses. weigth: ca. 1000gr
Universal handlebars, also suitable for motorcycles with hand guards Material 1200D polyester, anti-UV, compliant with ISO 4892-2 regulation, PE padding. Materials compliant with REACH regulation Other features Left / right straps with quick release buckles for easy installation Rigid insert to keep the opening open for the wrist Reflective imprints Each handlebar has two attachment points on the handlebar: 1. Exterior: direct attachment to the handlebar using straps and elastic straps 2. Inside: attachment to the handguard with straps (to adjust the position) Important note: The handlebars are supplied without accessories!
Features Shell ADT-advanced, a mixture of thermoplastic materials with high crash resistance. The NF-R shell is manufactured in two sizes. protection Inner polystyrene liner in two sizes (M and L) designed for better ergonomics and variable density. This property allows a gradual and progressive absorption of the energy generated by the impact. visor The visor of NF-R is PC-injected, scratch-resistant, class 1 optics with variable thickness. The hook and rotation system allows the removal of the visor without tools. ventilation The inner lining of polystyrene was examined in symbiosis with the air inlet on the outer skin. Through special channels, which are applied to Styrofoam, the air flow can provide optimal ventilation in the helmet and quickly release the hot air. lining The cheek pads and inner comfort shell can be removed, washed and replaced. They are made of precious bi-elastic fabric with special fibers and open-cell sponges for optimal airflow to stay fresh and dry. The restraint system is equipped with a micrometric buckle. The NF-R is equipped with a PINLOCK Max Vision lens.
Features Ladies jacket with a perfect fit Waterproof, windproof and breathable because of the Z-Liner membrane Removable thermal lining with inside pocket and phone pocket Napoleon pocket behind the front flap Scotchlite reflective stripes Two outside pockets with zipper Ventilation zippers in front and behind Removable soft protection at shoulders, elbows and back Short connection zipper Adjustable on the arms and waist
Profiter d'un confort total de matériaux hautes performances et de l'équitation véritable technologie dans le nouvel EQUINOX. Un modèle de molleton coupe subtile ajoute style à l'aspect tricot-à travers le chaud et flou intérieur vous permet de rester confortable. Tissus : polartec ® thermal pro ® texture tissus couche intermédiaire isolante et évacue l'humidité Caractéristiques : modèle de molleton coupe ajustée style est parfait pour un usage quotidien très respirant mèches l'humidité loin du corps zip frontal de 1/4 Centre spécifiquement les femmes coupe et couleurs ykk ® fermetures à glissière nouveau profil bas tirette de fermeture à glissière logos brodés confort mentonnière poche de poitrine gauche
