Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.Size: 1Capacity: 0 - 1mm (0 - 3/64 in)
The Stanley Tool Basic Toolbox has an innovative design with an organiser lid for small parts storage. It is fitted with geometric lock latches that enable smooth closing and opening. The latches are made from metal and have an ergonomic design. The toolbox can be secured with a padlock (not supplied) for increased security. STST1-75515: 320 x 188 x 132mm.STST1-75518: 406 x 205 x 195mm.STST1-75521: 482 x 254 x 250mm. Stanley Tools Basic Toolbox With Organiser Top has the following specification: Dimensions: 406 x 205 x 195mm.
Stabila 196-2E Electronic Level with IP65 protection against water and dust. This professional quality level with electronic inclinometer is ideal for carpenters, joiners, kitchen builders, metalworkers, formworkers, construction engineers, pipe fitters and many more.The Electronic inclinometer has a dual display for accurate easy reading of inclinations in all positions. A second display located in the upper surface for easier reading of the measured value. With angle indication in degrees, percentage, mm/m, in/ft. Accoustic signal for horizontal and vertical measuring, audible inclination guide with three different signal tones allowing the user to arrange elements without having to look at the spirit level. With automatic switch off can be selected after 10min or 2 hours. As a spirit level it has extra long ribbed profile providing a high resistance to deformation during everyday use on site and a permanently moulded precision vials for overhead reading - no readjustment required. It has removeable endcaps for measuring flush into corners, a special coating to protect level against dirt and ruberised handholes for easier handling. Measuring accuracy of electronic module @ 0° and 90° 0.05° @ 1° and 89° 0.2° Measuring accuracy of spirit level: in normal position: 0.029° = 0.5mm/m, and in upside down position 0.029° = 0.5mm/m. Protection Class: IP65.Stabila 196-2 Electronic Spirit Level. Length: 600mm (24 in).
The Bosch S1543HM Blades are part of the "Endurance for Brick" range. - Carbide Technology - For Small Bricks (up to a material thickness of 150mm) Specification: Total Length : 240mm Tooth Spacing : 12.7mm / 2TPI
The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Dipped handles.The Knipex 26 22 200 bent long nose side cutters have Bi-material, 2-component handles for a more comfortable and positive grip. They have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Hard wire diameter: 2.2 mm.Medium wire diameter: 3.2 mm.Hardness approx. 61HRC.Length. 200 mm.
The Bahco S4RM ratcheting spanners are made from top quality forged steel, nickel which is then chrome-plated in a matt-finish for a smooth and secure grip. Easy to use, these spanners simply grip the nut or bolt being removed or replaced, the ratcheting spanner heads are sized either side of each spanner for the desired size of nut or bolt, then just push the direction lever to remove or replace the nut or bolt with ratchet action. They are an ideal option for motor mechanics, motor cycle repairs etc., as these spanners can be used in awkward places and minimal movement action is required to use them.This ratcheting set comprises 3 spanners covering 12 sizes is supplied in a fabric carry case with belt loop for easy transportation and storage. Sizes: 8 x 9 x 10 x 11mm, 12 x 13 x 14 x 15mm and 16 x 17 x 18 x 19mm.
