Apache black/grey lightweight hooded sweatshirts are made from a soft, warm, but hardwearing material for protection against all work site conditions. Apache Workwear a range of durable high-quality workwear at competitive prices from the manufacturers of Apache Safetywear the choice of DIY and professionals in heavy industry, construction and specialist sectors.Size XL (Extra large)
The Faithfulll Carpenter's Pencils lay down a clear visible line irrespective of surface or grain. With the exception of some metals and polished or glazed surfaces, almost any material can be marked out with these carpenter's pencils. The pencil has flat sides to prevent it from rolling away. There are three colour coded grades of hardness to cater for different surfaces. Supplied in a pack of three.Grade: Soft Colour: Blue For softwoods and newly felled timber.
Nut Splitters are used for removing rusted on nuts from studs etc.A spanner is used to turn the hexagon end which has the effect of forcing the chisel end into a flat of the nut, forcing apart without damage to the thread of the stud.Size 19 to 27mm
Teng Tools specialises in a range of mechanics' hands tools to suit the price conscious professional user and the quality conscious DIY enthusiast. The Tools have been designed to Teng's own specifications, which meet or exceed British European or federal standards. This Teng Tools socket is a professional, bi-hexagon 1/2 inch square drive socket. It has been produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Made from chrome vanadium steel for strength and durability, with a satin finish.The TENM120519 Bi-Hexagon, 12-point socket has the following specifications:Size: 19mm. Length: 38mm.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
This Faithfull rule is extruded from 50 mm wide anodised aluminium, and is clearly graduated on both edges.It also features a handy metric / imperial conversion chart on the reverse and a hanging hole for storage.Imperial and Metric markings.Length: 1m (39 in)
