Pro'sKit 8PK - 3001D profesional 7 en 1 precisión electrónica pelacables y cortador alicates eléctricos (AWG 30/28/26/24/22/20)

These Forgefix Pozidriv Self-Tapping Screws have countersunk heads and are Zinc Plated for increased resistance to corrosion. They tap their own thread in to a pre-drilled pilot hole in sheet or solid material. They are single threaded to resist pull-out. APPLICATION:Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish.Self Tapping Screw Pozi Countersunk ZP 3/4 x 6 Box 200

The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle, and prevent mushrooming. ProTouch handles are designed to provide extra comfort, grip, and also reduces vibrations and reduces hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Avalible in the following sizes: MARS50014: 6mm (1/4in).MARS50038: 10mm (3/8in).MARS50012: 12mm (1/2in).MARS50058: 16mm (5/8in).MARS50034: 19mm (3/4in).MARS5001: 25mm (1in).MARS500114: 32mm (1 1/4in).MARS500112: 38mm (1 1/2in).MARS5002: 50mm (2in). The following sets: MARS500S3: 12, 19,and 25mm (1/2, 3/4 and 1 in)MARS500S3SS: 13, 19 and 25mm (1/2, 3/4, and 1in) (sharping kit inculded). MARS500S5W: 6, 10, 12, 19, & 25mm (1/4, 3/8, 1/2, 3/4, and 1in)MARS500S6: 6, 10, 12, 19, 25, & 32mm (1/4, 3/8, 1/2, 3/4, 1 & 1 1/4 in).1 x Marples MS500 Series All-Purpose Chisels with ProTouch Handle 12mm (1/2in).

Supplied with a kitbox, the Milwaukee M12 H Compact Cordless SDS+ Hammer Drill is a 2 mode drill capable of hammer drilling and rotary drilling, for maximum versatility. Optimised drilling from 4-8mm, with max drilling of 13mm, this drill is ergonomically designed, compact and lightweight for use in tight working spaces with minimal fatigue during use.With a low vibration (6.7 m/s²) for comfortable use this drill also has an in-built LED light to illuminate the work space in dark areas. There is also REDLINK™ overload protection electronics in the tool and battery pack to deliver brilliant system durability.Batteries and charger are NOT included

The Knipex 95 61 190 wire rope shears are ideal for medium hard wire cables up to 7mm diameter without splaying, including those that are extremely strong, such as for example tyre cord. They also have two crimping dies for end caps on Bowden cable sheaths and end ferrules for traction cables and the blades are hardened to approximately 64HRC for added strength and durability Cutting head on the 95 61 190 are forged with polished head and handles plastic coated for added grip and a comfortable grip. Specification Length: 190mm (7.1/2in).Cutting Capacities: Multi-Stranded Cable: 7.0mm, Wire Rope: 5.0mm, Medium Hard Wire: 4.0mm & Piano Wire: 2.5mm.This Knipex ;Wire Rope/Bowden Cable Cutter is fitted with PVC handles.

Jetcem is a specially formulated rapid setting cement based patching/repair compound which, when mixed with water, sets in about 30 minutes. Rapid setting (30 minutes, depending on ambient temperature and conditions).Easy mixing, just add water.Fills up to 25 mm in one application (for deeper holes in excess of 25 mm use Jetcem Premix sand/cement) Benefits: Internal and external repairs to gaps and cracks and walls and floors.Repairing flags, slabs, stones and bricks.Patching steps and window sills.Pointing brick and stone.Jointing earthenware pipes and drains.Repairs to ponds and pools.Setting in W/Cs and sinks.Leak sealing in concrete based surfaces.Setting railings and posts.This pack comprises 4x 3kg Jetcem Rapid Set Cement.

For use on oily, slick, wet, cold or dry surfaces, this non-toxic, waterproof crayon is ideal for timber, concrete, ceramics and metal.Card of 2Colour Red