The Britool 3/8 inch 12-point sockets (metric) are crafted from chrome vanadium steel with a high chrome finish. The OGV profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ISO 2725-1, DIN 3124, ISO 1174-1, ISO 691, ISO-1711-1.Size: 11mm Length: 25.7mmWeight: 22g
Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 6XAdjustment . 120 - 150mmAdjustment. 4.3/4 - 5.7/8in
The Faithfull Long Leg Tile Spacers are ideal for most tiling applications. These versatile spacers can be easily snapped when ‘T’ joints are required and may be easily removed once the adhesive is set. How to use: Apply adhesive with a notched edge spreader and secure tile firmly. Position one spacer at each corner of the tile, add more spacers as each new tile is placed alongside. For evenly spaced wall and floor tiles, always use same spacer brand and product code during tiling process. Tiles must be left to set for 24 hours before grouting. Faithfull recommend removing spacers once tile adhesive has set. Please note: Size of spacer may vary slightly to dimension stated. Always use same spacer brand and product code during tiling process as each brand and product is different.Size: 3mm.Pack: Tub of 1,000.
Masajeador muscular eléctrico de 12 V Percusión portátil Vibrante Pistolas de masaje potentes Masajeador muscular de tejido profundo de mano para cuello Espalda Hombros Pie pierna
The Rawplug Projecting Rawlbolt is suitable for heavy-duty metal fixing in which large bolts are anchored in a metal housing or shield for securing heavy items in concrete. Ideal for overhead and ceiling work, securing cable trays, ducting and trunking or installing radiator brackets, partitions and structural fixtures.Size. M10 x 60mm.Mximum Fixture Thickness: 60mm
Forge aluminium value door handles. Sprung lever on backplate. Fixings included. Fitting Instructions:1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a Bradawl.2. Drill Ø2mm Pilot holes and reposition the handle before securing using the wood screws provided.Designed to be used with a Euro cylinder mortice lock with centres of 57mm.
