Plasti-kote B8 Bottle 59 ml Sky Blue

Olympia Tools Bolt Cutter Centre Cut with compound action blades that are made from high carbon alloy steel blades, hardened and tempered, heat treated. Have a secure rubber grip, and are ideal for cutting wire, chains and bolts.

The Milwaukee PLH 20 SDS-Plus L Shape Hammer is a 2 mode drill - hammer drilling and rotary drilling - for maximum versatility. It has an SDS-plus chuck, with optimised hammer drilling at 5 – 12 mm. It has a forward and reverse mechanism. The PLH 20 features motor cooling airflow that is designed in a way that blows drilling debris away from the user when drilling overhead. A safety clutch protects user and machine if the drill bit jams. The drill has AVS (Anti-Vibration-System) to provide more comfortable use and less strain. The soft-grip handle and ergonomic 2-finger trigger with variable speed control increase the comfort further. Supplied in a kitbox. Specification Modes: Hammer Drilling, Rotary Drilling. Input Power: 620 Watt. No Load Speed: 0-2,700/min. Impact Rate: 0-4,400/bpm with 2.0 Joules. Capacity: Concrete: 20mm, Steel: 13mm, Wood: 30mm. Chuck: SDS-Plus. Cable Length: 4m. Weight: 1.9kg.

No air hose or compressor required. Eliminates the cost of fuel cells. Air/spring drive system means less recoil, better flush driving and easier maintenance. Fitted with a selective activation button; easily choose between sequential or bump fire mode. Also features tool-free adjustment of drive depth, a lock switch and 30 minute automatic shutdown for increased safety and longer battery life. The dry fire lockout system prevents nailer from driving when fasteners are low. Other features include a low battery indicator and pivoting rafter hook. Supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x Charger, 1 x Safety Glasses, 1 x Hex Wrench and 1 x Case

The DEWALT DWS520KT Heavy-Duty Plunge Saw has full wave electronics that maintain a constant speed under heavy load and the variable speed allows you to select the correct speed depending on the material you are cutting. The anti kickback function stops the saw from moving backwards along the rails and helps stop the saw from climbing out of the work piece when making plunge cuts. The parallel plunge allows the user to maintain a smooth and constant hand position while cutting and the included 48 tooth blade gives a fine and accurate finish with very little breakout in laminates. The rail adjustment allows the saw to be adjusted accurately to the rails and it has a 55mm depth of cut that allows the trimming and sizing of most common door sizes. The enclosed guard gives a 90% dust extraction capability. Specification: Input Power: 1,300 Watt.No Load Speed: 1,750-4,000/min.Blade: 165 x 20mm Bore.Bevel Capacity: 47°.Depth of Cut: @90º: 59mm, @45º: 44mm.Depth of Cut With Guide Rails: @90º: 55mm, @45º: 40mm.Length: 303mm.Height: 265mm.Weight: 5.1kg. The DEWALT DWS520KT Heavy-Duty Plunge Saw 1300 Watt 240 Volt Version.

These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw ZP M8 x 90 Bag 10

The DEWALT DCK654P3T XR Compact TSTAK­ Kit, contains the following: 1 x 18 Volt DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg. 1 x 18 Volt DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18 Volt DCS355 XR Cordless Oscillating Multi-Tool delivers up to 57 percent more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg. 1 x 18 Volt 125mm DCG412 XR Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18 Volt 165mm DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. No Load Speed: 3,700/min.Max Cutting Depth: 90 degree : 55mm, 45 degree : 42.1mm.Blade: 165 x 20mm Bore.Weight: 3.8kg. 1 x 18 Volt DCH273 Brushless XR 3 Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 Joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg.