Effekt-Pedal Netzteil-Adapter 9V DC 1000mA 5-Gänge-Gänseblümchen-Kette Akkord-Kabel Negativ Innen Positiv Außen

Features: 4-in-1 guitar effects pedal, distortion + overdrive + loop + delay. Distortion: a high gain distortion sound,2 modes to choose, with Gain, Tone, Pres and Vol control knobs. Gain--Adjusts the amount of distortion; Pres--Adjusts the high frequency; Vol--Adjusts the output level; Tone--Adjusts the EQ. Clockwise is brighter, counter clockwise is darker. Overdrive: Based on tube overdrive(ts9), with Drive, Tone and Level control knobs. Drive--Adjusts the amount of overdrive; Tone--Adjust the amount of treble in the sound; Level--Adjusts the output volume. FX Loop: The SEND and RETURN jacks allows you to expand your board with other pedals. The FX LOOP point is between the overdrive and delay modules. Delay: with Repeat, Delay and Level control knobs, 25ms-600ms adjustable delay time. Level-- Sets the level of delayed signal mixed with guitar tone, there is only guitar signal when fully CCW, and loudest delay when fully CW; Delay-- Adjusts the delay time from 25ms(fully CCW) to 600ms(fully CW); Repeat-- Adjusts the repeats of the delay signal, one repeat(fully CWW) and infinite feedback(fully CW)

Trumpet Music Wind Instrument 3 Keys Trumpet Kids Toys Gold Electroplating Plastic Decoration

Solo-G-Gitarrenständer von Gravity (Gebrauchsmuster geschützt) gibt es in drei Ausführungen: für akustische und klassische Gitarren, für E-Gitarren und Bässe und als Universal-Modell für die gängigsten Korpusformen.Die kompakten Stative in A-Form sind aus langlebigen Stahl mit schwarzer Pulverbeschichtung stabil konstruiert und mit rutschfesten Füßen ausgestattet. Die leichte Rückneigung, eine weiche Korpusstütze aus Gummi und TPU-Auflagen sorgen für sicheren Halt und schützen das Instrument. Solo-G-Gitarrenständer bieten zwei Aufstellwinkel und lassen sich zum Transport flach zusammenklappen. Technische Daten Stabile, standfeste Konstruktion Weiche Korpusstütze aus Gummi und TPU-Korpusauflagen Zwei Aufstellwinkel Flach zusammenklappbar Produktart: Gitarrenständer Material: Stahl Oberfläche: pulverbeschichtet Farbe: schwarz Geeignet für: Akustikgitarren Gewicht: 1,5 kg Schwarzer Ringsatz inkludiert: ja  

Hauptmerkmale Audio Anzahl Kanäle 10 Kanäle Digital sound Bearbeitung 24 Bit Samplerate 192 kHz Bildschirm Anzeige Ja Equalizer Equalizer Ja Anschlüsse und Schnittstellen AUX-Eingang Ja Mikrofon-Eingang Ja XLR-Out 2 Line-Eingänge (RCA) 4 Kopfhörer-Konnektivität 6,3 mm Monitorausgang 1 Technische Details DJ Mischer Nein Produktfarbe Schwarz Energie Stromverbrauch (typisch) 22,9 W Gewicht & Abmessungen Breite 244 mm Tiefe 294 mm Höhe 71 mm Gewicht 2,1 kg

The patented design of the BMS 4592 is a result of extensive dedicated research and development providing dramatic improvement in dynamic response, clarity and transparency. The BMS annular midrange diaphragm covers the frequency range between 300 and 7000 Hz with a smooth, linear response. The large diaphragm excursion of max. + / - 0,8 mm results in high output and increased power handling up to 1300 W peak. The ultra light annular diaphragm for the high range offers exceptional transient response with very high efficiency from 6 to 22 kHz. The unique voice coil technology employs a light weight Copper Clad Aluminium wire wound inside and outside of the Kapton? former to improve the heat dissipation, dramatically increasing the acoustic output and reliability of the driver while minimises the power compression. The use of high grade neodymium magnets provide improved performance while significantly reducing transducer weight. Technische Daten Extended Bandwidth (300 - 22000 Hz) Neodymium Magnet Assembly With two subsystems in one, each Driver covers a smaller Frequency Range for increased Power Handling, high Dynamic and extremely low Distortion Excellent Phase Coherence Perfect Time Alignment without Problems of Multi-Source Interference Ultra light Weight  

Features: This guitar neck is designed for Epiphone electric guitar neck replacement. High-quality maple neck, delicate and unique. Rosewood fingerboard with 24 frets, smooth and high density. Black gloss finish headstock, exquisite workmanship. Adjustable truss rod has been installed at the headstock. The hole for tuning machine is 10mm in diameter.