Roughneck Claw Hammer 16.Oz Tubular Handle

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

Weller Butane Gas operated soldering iron set is suitable for all kinds of applications. The 3 function soldering iron allows the tool to be used for soldering, hot air and open flame with an operating time of 30 minutes. Features Piezo electronic automatic ignition system and gas capacity display. Supplied in a sturdy storage box.Gas not supplied. Use gas refill PGR1. Comes with: Solder, lead free 1.0mm Dia, 15g, Cleaning Sponge, 3 Soldering Tips: Conical 1.0 mm UND, 2.4mm Chisel Shaped, 2.4mm Plus 'Hot Knife' heat shrinking tip. Specification Max. Temperature Soldering Tip: up to 450°C.Hot Air Nozzle: up to 450°C.Open Flame: up to 1300°C.

Metric combination spanners offset at 15° - DIN 3113A. Manufactured from chrome vanadium steel with a satin finish.Size 41mm.Length 460mm

These Knipex high-quality flat nose pliers are made from fibreglass-reinforced plastic, which is fully insulated and provides protection against bridging for working on live parts up to AC 1000V and DC 1500V. These solid pliers also do not act on magnetic fields and are fully spark-free. They are ideal for meter assembly and meter blocking. In addition, they are excellent for use in chemically aggressive environments. The handles have a soft plastic zone for better grip. Performance: Conform to IEC 609DD, and DIN EN 60900.

1/4 "SAE Aire acondicionado Refrigerante Abrelatas CA Puede tocar la válvula de la botella Puede tocar la válvula Válvula de la compuerta Válvula de cierre de la válvula de retención

The D2400 has a stainless steel rail system that is integrated into the saw frame ensuring accurate cuts. A cantilevering rail system allows for 610mm ripping capacity. It also incorporates a plunge function with an integrated 45°/22.5° feature for quick angle cuts. This allows the user to make plunge cuts for electrical outlets. Side and rear water attachments can be placed on the tile saw to catch overspray, keeping water in the pan. In addition to this the dual water nozzles can be adjusted for optimal water placement on the blade in order to minimise overspray and mist.   The compact lightweight design is great for transportation and has an easy one person set up. With handy features such as and easy edge guide with 2 positions (90° and 45°) for corner cuts and a removable cutting cart for easy cleaning, this DeWALT tile cutter is a great for personal or professional use.