Im Gespräch mit DESPICABLE ME Deluxe, 20280 (MO20280)

Tri Triángulo Fidget dedo de la mano Spin Spinner Widget Enfoque de juguete EDC Pocket Desktoy regalo de plástico para ADHD ADD Niños Adultos aliviar el estrés Ansiedad El aburrimiento Killing Time

Corona R4DM-SB 2.4G 4CH DMSS Compatible Receiver With S.BusDescription:The Corona R4DM-SB is a 2.4GHz DMSS compatible receiver that is designed to use with JR DMSS 2.4GHz transmitters, such as XG6,XG7,XG8 ,XG11 and XG14 under DMSS protocol mode.Specification:Brand Name: CoronaItem Name: R4DM-SBChannels: 4Modulation: DMSSBand: 2.4GHzWeight: 7gVoltage Range: 3.6 ~ 8.5VOperating Current: 60mA max, 35mA under loadOperating Temperature: -10~70 degrees CLatency: 13 ~ 14msSensitivity: -96dBmFeatures:Full range receiver4 Channels - throttle, aileron, rudder, elevatorSupports S.BUS connectivityFor use with JR DMSS transmittersLightweight and compact weighing in at just 7 gramsFail safe programmableBind Procedure:Turn on the DMSS transmitter, leave it 0.5M~1M away the receiver.Connect a shorter on CH2 of R4DM(signal and GND) when bind with XG7; and connect a shorter on CH3 of R4DM when bind with other transmitters.Connect the battery to the receiver(CH1 or CH4 of R4DM) while pressing down receivers button.Red LED light on and Green LED off when searching signals, and turn to Green LED light on and Red LED off indicate bind is succeeded.Fail-safe Setting:R4DM set failsafe on the DMSS transmitter just like the operation of the JRs DMSS receivers. We highly recommend you set failsafe feature while flying your models. An example of a useful Failsafe setting would be to shut down the models throttle, so that it does not fly or drive away uncontrolled.Special/Normal Mode Switch Guide: If you

ELC Princess Carriage Rosebud Village 143539 (143539)

Toy for Blowing Bubbles Gun Blower Machine Wand for Kids Electric Automatic Water Gun Kids Toys

SKYSTARS BetaFlight F405 AIO Flight Controller OSD4 PCS 50A Blheli_32 3-6S DSHOT1200 ESC for RC Drone FPV RacingSpecifications:Brand name: SkystarsItem name: BetaFlight F405-AIO50ABlheli_32 3-6S DSHOT1200 ESCSize: 36x46mm PCB with 30.5mm mounting holesWeight: 10gFC Specifications:MCU: 168MHz STM32F405IMU: MPU6000 accelerometer/gyro (SPI)Baro: BMP280 (I2C)OSD: BetaFlight OSD w/ AT7456E chipBlackbox: MicroSD card slot (SD/SDHC)VCP, UART1, UART2, UART3, UART4, UART5Built in inverter for SBUS input (UART2-RX)PPM/UART Shared: UART2-RXSoftSerial on TX2, S5 or S6 optionalCamera control on S6 or DAC optionalSmartaudioTramp VTX protocol supportedWS2812 Led Strip : YesBeeper : YesRSSI: YesPDB Specifications:Input: 6~30V (3~6S LiPo) w/TVS protectionPDB: 4x50A , 4 layers*2oz copper PCBBEC: 5V 3A cont.LDO 3.3V: for Spektrum RXCurrent Sensor 184A (Scale 179)Battery Voltage Sensor: 1:10 (Scale 110)50A Blheli_32 brushless ESCSpecifications:Brand name: SKYATARSItem name:50A Blheli_32 brushless ESCFirmware:Blheli_32 bitInput: 3-6SBEC: NOContinuous current: 50ABurst current:60A =10SWeight:7.4g(include cables)Size:26X15X6MMFeatures:3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)6x PWM / DShot outputs without conflict5x UARTs1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)1x pair I2C1 pads1x press button for BOOT(DFU) mode- Support Dshot 1200 in default out from factory- Also support Oneshot42, Oneshot1

Wooden Cartoon Animal Chassis Zebra Pattern Circle Mini Beads Maze Educational Toy for Kids Hand Eye Coordination Toy