Features 3 seasons gloves made out of soft / mild leather. Also suitable as a casual winter glove Equipped with a wind, waterproof and breathable Hipora membrane. Fleece lining
Description:High quality rubber, long life spanSpecification:Material : RubberColor : BlackWidth : 9mm/0.35inDiameter : Approx 59mm/2.32inFitment:Black And Decker KW715, KW713 and BD713.Package Included:1 X Belt
Features Ladies jacket with a perfect fit Waterproof, windproof and breathable because of the Z-Liner membrane Removable thermal lining with inside pocket and phone pocket Napoleon pocket behind the front flap Scotchlite reflective stripes Two outside pockets with zipper Ventilation zippers in front and behind Removable soft protection at shoulders, elbows and back Short connection zipper Adjustable on the arms and waist
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Kurzinfo: Brodit ProClip Left mount - Halterung - Schwarz Gruppe Zubehör Hersteller Brodit Hersteller Art. Nr. 804284 Modell ProClip Left mount EAN/UPC 7320288042848 Produktbeschreibung: Brodit ProClip Left mount - Halterung Produkttyp Halterung Vorgesehen für Handy Geeignet für Installation Fahrrad Produktmaterial ABS-Kunststoff Ausführliche Details Allgemein Produkttyp Halterung Vorgesehen für Handy Geeignet für Installation Fahrrad Produktmaterial ABS-Kunststoff Farbe Schwarz Verschiedenes Kompatible Fahrzeuge Renault Megane / 2009 (für Europa)
