Catégorie:Voiles longueur coude; Décoration:Appliques; Couche de voile:Deux couches; Silhouette de voile:Ovale; Tissu:Tulle,Dentelle; Longueur Actuelle de la Voile:27,56 dans (70cm); Style:Elégant,Bord en dentelle; Largeur:75; Longueur approximative:75; date d'inscription:06/06/2019; Mode de production:Auto-produit; Produits spéciaux sélectionnés:COD
Egret flower is the flower of habenaria radiata, native to North Korea, Taiwan and Japan, is kind of orchid. It have 12 species in planting record. White egret flower is very beautiful, scientific name is habenaria radiata.
The Forge Tubular Mortice Latch for internal doors can be used with any lever latch handle, lever on rose handle or door knob. Supplied with screws and fitting instructions.Fitting Instructions:1. Mark a height line on door face and edge as well as a centre line on door edge.2. Drill a Ø23mm hole into door edge to accept the latch body, and a Ø19mm hole in door face for the spindle bar measuring from the door edge (43mm for 65mm latch, 60mm for 80mm latch).3. Fit latch and use a pencil to mark around the faceplate. Chisel out so the faceplate lies flush with door edge.4. Transfer the height line onto the door frame and mark a vertical line at half the door thickness from the door stop.5. Drill a Ø16mm hole, 10mm deep at this point and square out with a chisel. Position the striking plate over this hole, mark around with a pencil and chisel out to lie flush.Case size: 65mm (2.5 inch). Backset size: 44.5mm. Forend finish: Nickel. Supplied with matching screws, face plate and strike.
This Forge classic Backplate Handle has a scroll lever design. The sprung handle has a lasting finish and is lacquered to prevent discolouration during use. Ideal for internal or external use these handles have been tested for corrosion resistance and cycle tested beyond 120,000 uses. Screws Included. Fitting Instructions:1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.2. Drill Ø2mm pilot holes and reposition the handle before securing using the wood screws provided.3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.Designed to be used with any tubular mortice latch. Backplate Size: 102 x 40mm.Finish: Victorian Brass.