Precisión Rodamiento de servicio pesado Morse Eje cónico CHC Torno Centro Máquina de torneado de alta velocidad

Has a long lifetime thanks to high-quality components made of aluminium and steel. Optimum handling, due to the ergonomic handles with softgrip and low centre of gravity for optimum handling. Anti-slip surface prevents the tool from falling over. Specification Toolholder: 28mm Internal Hexagon.Input Power: 2,000 Watt.Impact Rate: 1,000/bpm.Impact Energy: 69 Joules.Weight: 29.5kg. Noise/Vibration Information Measured values determined according to EN 60745. Total vibration values (vector sum of three directions). Vibration level (chiselling) : 8.0 m/s².Vibration level (drilling/chiselling) : 8.0 m/s².

RIDGID Tongue & Groove (Slip Joint) Pliers feature a flush rivet design which provides a stronger tool and allows access to tighter areas. The pliers have been forged and heat-treated for extended life and durability. Professional quality tools, precision crafted for ultimate balance, high strength and exacting performance. They are fitted with cushioned grips that are designed for comfort only. They are NOT intended as insulation against electric shock.RIDGID 734 Tongue & Groove Pliers Length: 254mm (10in).Capacity: 51mm (2in).Weight: 0.40kg.

The DEWALT DCK694P3 Brushless 3 Speed 6 Piece Kit, contains the following: 1 x 18 Volt DCD995 Brushless XRP Hammer Drill with a tough three speed all metal transmission for increased runtime and longer tool life. Part of the intelligent XR Lithium Ion Series designed for efficiency and faster applications. Chuck: 1.5-13mm. No Load Speed: 0-450/0-1,300/0-2,000/min. Impact Rate: 0-7,650/0-22,100/0-34,000/min. Max Torque: 80Nm. Drilling Capacity Wood: 50mm, Steel: 13mm,Masonry: 16mm. 1 x 18 Volt DCF886 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit holder: 6.35mm (1/4in) hex.No Load Speed: 0-2,800/min.Impacts Per Minute: 0-3,200/bpm.Max Torque: 165Nm.Capacity: Bolt M12. 1 x 18 Volt DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. No Load Speed: 3,700/min.Max Cutting Depth: @90°: 55mm, @45°: 55mm.Blade: 165 x 20mm bore.Weight: 3.8kg. 1 x 18 Volt DCG412 Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18 Volt DCS331 Jigsaw has a keyless blade change and intelligent variable speed trigger. Accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm. 1 x 18 Volt DCL040 LED Pivot Light has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED Bulb produces 110 Lumen output (10,000Hr Life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with ratchet lock. 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries. Supplied with 3 x 18 Volt 5.0Ah Li-Ion Batteries and 2 x DS300 Tough System Kit Boxes.

DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3133 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 80.Pack quantity: 10.

The Norbar Adjustable Industrial Torque Wrenches have a robust construction, which gives accurate results to ±4%, even in arduous working conditions. Their large break angle improves accuracy by reducing the possibility of over torqueing and the cam control of the mechanism gives a controlled break which will not throw the operator off balance. The torque wrenches are dual scaled, with both N.m (Newton Meters) and lbf.ft graduations.  Supplied with a declaration of conformance to satisfy the requirements of ISO 6789:2017 and carry case for storage and protection. 3AR Industrial Torque Wrench Specification Drive: 3/4in Square.Range: 100 – 500Nm (70 – 350 lbf.ft).Torque Radius: 683.4mm.Ratchet Teeth: 36.Ratchet Type: Push-Through.Length: 910mm.Weight: 5.2kg.

Type:Pull-out / Pull-down; Style:Antique; Finish:Antique Brass; Faucet Type:Kitchen faucet; Installation Type:Centerset; Valve Type:Ceramic Valve; Faucet Body Material:Brass; Handle Material:Zinc Alloy; Batteries Included:No; Installation Holes and Handles:Single Handle One Hole; Features:Pull out; Shipping Weight:2.000; Net Weight:1.0; Listing Date:11/11/2020; Special selected products:COD