Gratis
Apoyo
Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5
Cushion drum sander set consisting of drum, arbor and 1 100 grit sanding belt. Size: 130 mm diameter.
ABUS 83WP Extreme weatherproof open shackle heavy-duty fully re-keyable through hardened steel alloy padlock, with a ball bearing locking mechanism for extra security, has a tough through hardened steel alloy shackle as standard with NANO PROTECT™ Chrome Plating. 6 pin tumbler cylinder with rust free components with anti-pick mushroom pins, resists picking. Can be adjusted to operate key retaining or None key retaining, automatic locking or key to lock. Where to use: The 83 series range of padlocks offer a medium to high level of security, with the ability to offer various levels of security within one keying system and is suitable for internal or external use. NANO PROTECT™ Chrome Plating, Hardened steel & through hardened steel alloy shackles get the most effective protection available, where smallest nano particles close the smallest gaps found in the normal chrome plating 'making rusty shackles a thing of the past' 1,000 hours salt bath test, the equivalent of 40 years in a harsh environment proves the durability of the NANO PROTECT™ process.
The RIDGID Matador Vices are professional bench vices for the workshop, that have an all forged steel construction, that is 3 times stronger than cast iron. They have a large hardened anvil, with hardened and serrated jaws for maximum durability, and machined and hardened sliding surfaces. The rolled twin start Acme thread provides precise operation and longevity with a removable steel spindle nut and measuring scale.RIDGID 160 Matador Vice Jaw Capacity: 225mm.Weight: 25.0kg.
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 18 x 21mm Length 150mm (6 in)
The Milwaukee® M12 CID Fuel™ 6.35mm (1/4in) hex Impact Driver has 2 modes to cover a number of applications. Mode 1 (0-1,200 rpm, 19Nm torque) is ideal for precision work, whereas Mode 2 (0-2,650rpm, 135Nm torque) delivers maximum performance for the toughest applications. It also has a bright LED light to illuminate the workspace. Designed to out-perform other heavy-duty power tools, it has POWERSTATE™ brushless motors for up to 10 times longer motor life. REDLINK PLUS™ intelligence, providing total system communication with overload protection to increase the tool's life. REDLITHIUM-ION™ battery packs are highly durable and feature a fuel gauge to display the remaining charge. Individual cell monitoring in the battery optimises tool run time. M12 CID-202C: 2 x 12v 2.0Ah Li-Ion Batteries. M12 CID-0: Bare Unit, No Battery or Charger. Specification Bit Holder: 6.35mm (1/4in). No Load Speed: 0-1,200/0-2,650/min. Impact Rate: 2,700/3,550/bpm. Max Torque: 19/135Nm.