Acrylic Polymer blended with ultra fine white Dolomite for enhanced surface finish.For interior and exterior use.For use in repairing plaster, stone, concrete or wood.Long lasting repair.Extremely smooth finish.Ronseal applicator included.Very good adhesion. Easy to sand.Ready to decorate in 1 hour.Fills holes up to 5mm deep.
EVERBUILD GRIPTITE is a ready to use gap filling and panel adhesive based on a high bond strength synthetic rubber/resin mix in a solvent carrier. Adheres to most common surfaces inside and outside the home. Bonds to wood, plaster, plasterboard, carpet, carpet grippers, metal, glass, ceramics, brick, concrete, cork, uPVC and certain plastics. Benefits;Solvent based formula - quick drying / high early bond strength.Excellent adhesion/bond strength - adheres to most common surfaces.Good early grab properties - usable in both vertical and horizontal positions.High solids formulation - excellent gap filling properties without shrinkage.Suitable for use where both surfaces are non-porous.Excellent external weathering properties-Suitable for exterior use Ideal for:Bonding dado rails, architraves and skirting. Fixing parquet and cork flooring.Fixing wall cladding direct to internal wall surfaces or timber battens.Fixing battens directly onto walls without fastenings.Bonding carpet gripper systems to most floors without the need for nails or tacks.Bonding stair nosing to concrete or wooden stairs.Fixing polyester, wood, PVCu or metal thresholds.Fixing nameplates, plastic boxes, decorative frames, wall sockets and junction boxes to most surfaces.Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans. Limitations;Do not use on damp surfaces: use EVERBUILD GUN A NAIL.Do not use as a mirror adhesive: use EVERBUILD MIRRORMATE Do not use on polystyrene/styrofoam/expanded polyurethane - use EVERBUILD GUN A NAIL.Heavy materials (greater than 8kg per sq meter) must be supported for at least 8-24 hours depending on size of item. Solvents present may attack sensitive plastics. If in doubt, rest a small area first. C4: 350ml.
Liberon Sanding Sealer quickly prepares the surface prior of bare wood and MDF prior to wax finishing decorative items. It will seal the surface so that less wax is needed and its special lubricants will ease sanding. For table tops, shelves and other surfaces that need a hard wearing finish, seal with Liberon Finishing Oil instead of Sanding Sealer and then finish with wax if required. On floors use Liberon Floor Sealer and then Floor Wax. Purpose:Liberon Spirit Sanding Sealer quickly prepares the surface of bare wood and MDF used for furniture and decorative items prior to wax finishing. It seals the surface so that less wax is needed and its special lubricants ease sanding. Performance:- Ideal for sealing wood before waxing - Suitable for use on all types of new or stripped furniture; including MDF - Brush or cloth applied - Ideal for use on turned woodwork Preparation:Ensure surfaces are bare, dry and free from dust. If you want to colour the wood apply Liberon Palette Wood Dye before the sealer. Application:Shake well before use. Brush on a thin coat of sealer, allow to dry for at least one hour and sand very thoroughly with 240 or 320 grit abrasive paper. Apply a second coat if required and resand after a minimum of one hour. Apply Liberon Black Bison Paste Wax using Ultra Fine (0000) Steel Wool.The Liberon LIBSS1L Sanding Sealer comes in the following: Pack Size: 1 Litre
Venice Arc Office Desk Screen- Grey / Blizzard YB108 The Venice desk screen is designed to fit most desking systems available online. This stylish desk mounted screen features a sloping arc design which is 380mm at its highest point and 50mm at its lowest, and has a slim PVC trim which is available in various finishes to choose from; silver, white or black. The Silverline Venice office screen is supplied with 16-33mm spigot brackets as standard which allow it to fit the wide range of office desks available on our site. This non-linking desk screen is available in a variety of sizes, including the larger 480mm high option in the arc design, and is also available in straight or wave designs. A wide range of colours is available (please see the colour swatch image above for all colour options). If you would like to request a colour sample, or the colour you wish is not in the drop-down colour selection list*, please call 01355 236117 for pricing and advice. *images shown are for information purposes only, if in doubt PLEASE REQUEST A COLOUR SAMPLE or view the entire range at Camira Fabrics
