The Britool 3/8 inch 12-point sockets (metric) are crafted from chrome vanadium steel with a high chrome finish. The OGV profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ISO 2725-1, DIN 3124, ISO 1174-1, ISO 691, ISO-1711-1.Size: 10mm Length: 25.7mmWeight: 20g
Faithfull heavy-duty clamps manufactured from a high quality carbon steel bar with large malleable iron clamping heads. Clamp bars have a Black Oxide coating with powder coated heads for complete rust protection. Other features include a high grade steel mainscrew with a wear resistant Acme thread, which applies pressure quickly and smoothly. Tail slides are easily adjusted and secured by a steel pin passing through one of the locating holes. Tail slide and heads are flat bottomed so that the clamp can stand upright without support.
The RIDGID Screw Feed Tubing and Conduit Cutters provide clean, square cuts. They are fitted with an X-CEL Knob that can cut tubing more quickly and easily thanks to the larger, more ergonomic design. They can cut through copper, brass, aluminium and thin-wall steel. Models 10, 15 and 20 feature a convenient fold-away reamer.RIDGID Heavy-Duty Screw Feed No.30 Tubing and Conduit Cutter Capacity: 25-79mm (1 - 3.1/8in).Std. Wheel: E-1240.Weight: 1.60kg.
The Stanley FatMax Pro level has solid-block acrylic vials to provide an accuracy of 0.5mm/m in eight orientations. In addition, every FatMax Pro level comes with a lifetime accuracy warranty. The level is 5 times stronger than other Stanley levels, thanks to its unique reinforced box-beam construction. The lightweight aluminium body and sturdy bi-material handgrips make handling easy and the precision engineered, dual-machined levelling surfaces ensure maximum accuracy.The vials are magnified by 20% for improved all round visibility, and the shock absorbing end caps protect the level even if it is dropped.Length: 2000mm (80in).
The Zarges K470 Aluminium Case is a high-quality aluminium universal box. The lid has a stainless steel hinge strip, two lid straps and foamed seal all round. The case has cast-aluminium stacking corners, and a high level of stability due to 3 fully-welded aluminium profile frames. Ergonomic and durable, it has C fasteners for at least 20,000 operating cycles, and profile-section joints that are fully welded. The snap fasteners can be secured with a plug lock, have lead seals, and provide protection against bursting open. They can also be sealed by a padlock (Max shackle thickness 6mm). Ergonomic handles provide comfortable handling, with loads of up to 50kg. Also has ergonomic heavy-duty sprung drop handles. The clearance dimensions are approximately 30mm less than the inside dimensions. All-round beading and corner beads give even more durability. Comes in 11 standard sizes. Customised sizes available.Zarges K470 Aluminium Case. Internal length: 550mm. Internal width: 350mm. Internal height: 150mm. External length: 600mm.External width: 400mm.External height: 180mm. Volume: 29 Litres. Weight: 4.2kg.
The band clamp is suitable for assemblies made of wood, plastics and non-ferrous metals, but it can also be used with ferrous metals when firm all-round clamping which will not damage or distort the work is required. Because the tape is tightened evenly from both sides, pressure is uniformly distributed all round or at each corner, thereby preventing distortion on one side. Self locking occurs automatically as the strap is tightened. This ensures consistent tension, which is maintained until the strap is released. The Vario-angle adapt automatically and infinitely variably to any angle from 60° to 180° . Clamping Range Up to 7mBand Width & Depth 25mm x 1mm Angle 60 / 80 DegreesWeight: 0.53Kg
Llave de amoladora angular Llave de máquina de corte ajustable Llave de amoladora de tuerca de seguridad ajustable Llave de pasador ajustable Llave de amoladora Llave ajustable
