Features 100% waterproof and breathable insert Adjustment on sleeves Short back zip Short back loops Wallet pocket Ventilation system Inside pocket Height-adjustable elbow protectors Body Fit Shoulders and elbows protectors Reflective material
Specification:Color:BlackMaterial:ABSProduct Name:Car Grille Hood TrimPlacement on vehicle:Car Grille HoodSize:134cm/52.76in x 17cm/6.69in (L x W)Features:-Easy Installation, Direct Fit.-Improve the appearance of the car.Fits:For Mazda CX-5 CX5 2017 2018 2019(The Compatibility Is Just For Reference. Please Compare With Your Original One Before Purchasing!)Installation:1.Press hard once and finish.2.Tear off the double-sided tape.3.Clean the body with a towel to ensure that there is no water,oil,debris,etc.Package included:1 x Car Grille Hood TrimNote:1.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)2.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.3.There are no instruction included!Professional Installation Is Highly Recommended!!If you want to know how to use or install it,please contact us by Email.We will provide help as much as possible.
Protection certified under norm EN 13594:2015 "protected glove for motorcyclists" Aramide protection on back of hand hard plastic knuckle protection knuckle protection tested (impact test for knuckle protection) ball of thumb reinforced with SuperFabric®-brand material Fit/features visor wiper special flat seam elasticated leather panels on back, thumb & fingers velcro adjustment at wrists & cuffs Lining unlined Outer shell highly abrasion-resistant kangaroo leather palm goat skin upper colourfast & sweat-proof
Description:20W Car Charger Qi Wireless Fast Charger Charging Dock Pad For Samsung XiaomiItem Specifics:Model: K1Color: BlackType: Car ChargerOutput: 15W MAXConnectivity: WirelessInput: DC 5V 9V 12V/1.67ANew: A brand-new, unused, unopened, undamaged item Package Included:1 x Charger
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Outer material Buffalo leather Insulating material Complete, removable thermo-aluminum lining 120 g Protectors adjustable elbow and shoulder protection Bag for back protection plate Comfort Regular fit 4 outer pockets 3 inside pockets hip adjustable Wrist adjustable with zippers Short collar raised Neoprene collar Pants with connection zipper Fixed mesh lining
