Gratis
Apoyo
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Description:Euro LightsFastEasy InstalledLamp with long life expectancyWaterproofWeatherproof and 100% Rust FreeSpecification:Product Name:Turn Signal LightMaterial: PlasticColor: Yellow,clear,tanSize:120x45x53mm(LxWxH)Surface Finish: PlasticManufacturer Part Number: 002001-0197Placement on Vehicle:Front ,Rear,Left, RightFitment:For BMW F 650GS 2008-2012For BMW F 800GS 2008-2012For BMW F 800R 2008-2014For BMW F 800S 2006-2010For BMW F 800 ST 2007-2011For BMW HP2 Enduro 2005-2010For BMW HP2 Megamoto 2006-2010For BMW HP2 Sport 2008-2010ForBMW K 1200R 2005-2008ForBMW K 1200S 2005-2008ForBMW R 1200GS 2004-2013For BMW K 1300R 2009-2014Note:1. We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3. Instruction is not included,professional installation is highly recommended.4. The color of the actual items may slightly different from the listing imagesdue to different computer screen, thanks for your understanding.Package Included:1 X Pair Turn Signal Light
Description:100% brand new.The rubber buttons are included with the key shell.It is a brand new 2 button remote key fob case shell cover.The fob case shell cover comes with screw and case but no blade.Sold for key refurbishment and is not intended to be a replacement part.You can use your old remote key then there is no programming requirement.Perfect replacement key shell cover,to refurbish your old key with broken button.Specification:Weight(Kg):0.01Color:BlackFitment:Citroen C1 C2 C3 C4 XSARA PicassoPeugeot 107 207 307 407 106 206 306 406Package Included:1 X Key Shell Cover
* Dark coloring with used look and crinkle effect * Length adjustment with single cuff and reflective edging * SAS-TEC protectors on the knee. Bag for optional hip protectors | Article: Scott Denim Stretch Ladies Motorcycle Jeans, blue, Size 36 for Women | Article: Scott Denim Stretch Ladies Motorcycle Jeans, blue, Size 36 for Women, blue, Size 36 for Women
Past the turning point Engineered for the unexpected. The guaranteed to keep you dry® forecast stays packed away until you need it. Easy to put on over your riding gear, stows away in its own pocket and takes up minimal volume in your gear.
Top 3 benefits
Stay dry in unexpected weather Packs to very small volume in its own pocket Weatherproofness only when you need it
Features
Guaranteed to keep you dry® Gore-Tex® paclite™ two-layer laminate technology 3M™ Scotchlite™ reflective material Water resistant YKK® zippers in exposed areas Snap adjustment at bottom hem Packable pant stuffs into its own internal pocket Gore on-road certified for waterproofness