Queen Kerosin Western, dress women

A stylish jacket in the spirit of university Teddies prepped for a motorcycle ride. Outer garment
Mixed materials Buffalo leather on sleeves Woolder brushed woolen material, a scratched wool process offering an elegant, genuine Teddy s University appearance Water-repellent
Isolation
Removable full thermal lining
Protection
Personal Protection Equipment approved shoulder protectors Adjustable approved elbow protectors Pocket for approved back protector
Comfort
Regular fit Fixed mesh lining Zip cuff adjustments Waist adjustments 2 outer pockets 1 arm pocket 3 inner pockets

RX-7V Ventilation New diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops of the new diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions, closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Shell Construction: PB-SNC2 Peripherally Belted Structural Net Composite Arai´s proprietary (super fibre belt) Peripheral Belt, borrowed from our F-1 technology, maximizes shell strength and flexibility while maintaining low weight. Positioned across the top of the eye port, this band allows the use of a thinner EPS liner which greatly enhances the upward field of view – especially appreciated in a full racing tuck! The Structural Net Composite adds a physical bond to the resin bond of the many layers of fibres and reinforcing materials within the shell. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Ventilation: Eyeport Airchannel Enhanced air exhaust from the eye port area, pulled through dedicated air channel to side ducts, improving efficiency and reducing noise. Front Ventilation: Center top vent The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions, closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. Front Ventilation: Diffuser system The new diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops of the new diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions, closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Front Ventilation: Brow vents extended to temple area Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Pull Down Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable. Aerodynamics: Patented Air Wing® adjustable MotoGP tested and designed to greatly reduce drag, turbulence and buffeting resulting in more comfort and additional top-speed. It improves stability of the helmet at high speeds or when braking hard and reduces noise. Depending on the model the Air Wing is adjustable in five different angles of attack positions to suit every riding position. Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: Pinlock insert lens included Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Neckroll Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: 5mm ’’Peel Away’’ Temple pad Arai´s peel-away temple crown pads give the option of 5 mm more interior with* if needed. Comfort: Emergency Release System (ERS) Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury. Comfort: Breath guard Works in conjunction with the dual-pivot® chin vent to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from the inside surface of the shield. Comfort: Chin Curtain Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Approval: SNELL M2010/2015 The American SNELL Memorial Foundation is an independent organisation, SNELL M2010 is their latest new, more shock-absorbent standard. For the M2010 standard a steel ball shaped rather like a tennis ball anvil is used, they also test with flat and “kerb” shaped anvils). The impact test area of SNELL is larger than that of ECE. Multiple impacts and a penetration test on random spots are used. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.

This helmet has a real efficient aerodynamic system (for optimum ventilation). Perfect for daily users as well as seasonal ones and the adventurers, the EXO-510 AIR is the best quality and has the most features in a helmet you can buy for that price ! The aggressive and high octane look will amaze you, it embodies the best of all our technologies ! Features
Outer shells: 3 Airfit Concept Pinlock® Maxvision New Ellip-Tec® Faceshield System Kwikwick2® liner Advanced Polycarbonate Composite Engineered Shell: Quiet, aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additional protection. Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet. Breath-deflector: Enhanced fog-free performance. Chin-cover: contributes to noise reduction. Micrometric Automatic chinstrap buckle for quick release and precise adjustment. This helmet comes standard with a clear visor.
Airfit Concept Airfit™ permits a rider to personalize helmet fit through air adjustable cheek pads with additional noise reduction.Only by SCORPION EXO! Pinlock® Maxvision Fitting perfectly into the specially depressed area of the faceshield, the Pinlock® creates continuous air pressure through the compression force, which in turn stops condensation – and thus fogging – from occurring even when the temperature difference between the outside and the inside of the helmet increases. Kwikwick2® LINER:Very effective, hypoallergenic, removable, machine washable, and very soft and pleasant to the touch, the KwikWick2® lining of the new ScorpionExo® 2011 range is a real custom-made slipper for your head. New Ellip-Tec® Faceshield System Launched on the new Scorpion Racing Exo-2000 Air, the ELLIP-TEC® faceshield mechanism further improves the ease and speed of faceshield changes so unique to Scorpion. This operation can be done tool-less within 10 seconds, with the shield open. Wind tunnel designed to minimize wind noise at high speed, fitted with even more powerful springs to ensure optimum fit of the shield against the seal through the compression force, fully sealed and quieter, ELLIP TEC is also stronger to keep the shield in place in the event of a fall.

Specification:Product NameCar door handle(Right side)SizeShown as the pictureColorBlackWeight0.7kgFitmentFor VW Transporter T4Package Included:1 X Car Door Handle2 X Keys

Carbon Fiber K+N 48mm Air Filter For 140cc 150cc 160cc Pit Dirt Bike ScooterDescription:EasytoinstallK+Nstyleperformancejetconehighflowairfilterwith45degreeangledneckforpitbikesandmotorbikes.Fitsupgradedpitbikecarburettorsfittedtolargerenginesabove160cc.Theflexiblerubberneckcanbefittedtolargerorsmallercarburettorsastheneckwillflexupanddownby1-2mmtomaximisefitmentoptionsandincreaseairflow.The48mmdimensionreferstotheinternaldiameteroftheairfiltersneck,wherethejubileeclipislocated,andwhereitwillconnecttothecarburettor.Thisqualitygauzefilterimprovesairflowandassistsevenrunning.Manufacturedfromsteelgauzebondedontoarubbercollar.Specification:Color:CarbonFibreIncludesJubileeClip:YesIncludesCoverFixingHoleinTop:NoIncludesCovers:YesFilterElement:GauzeKNStyleNeck:BentInnerDiameterofNeck48mm/1.89OverallHeight,includingNeck:135mm/5.31WidthatWidestPoint:89mm/3.5Packagesize:88x88x125mmFitment:Modelsthatthissizeairfiltermayfitinclude:SomeHondaCB250/400models/Superdream79-85SomeKawasakimodels/GPZ305models/GPZ600RSomeSuzukiGSmodelsSomeSuzukiGSX250modelsSomeYamahamodels/XS400SOHC78-81/XS250SomeSymmodelsSomeTriumphmodels/T120BonnevilleSomelargerpitbikeenginesabove160ccwithupgradecarburettorssuchasMikuniandMolkeSomeKazumaCougar250quadbikesSomeKazuma250ccquadswithchokeleversThisitemhasbeenknowntofit:MiniMotosOtherBrands/GenericMiniMotoQuadType2MiniMotosOtherBrands/GenericMiniMotoDirtbikeOriginalMiniMotosOtherBrands/GenericRacingBike(AirCooled)MiniMotosOtherBrands/GenericMiniMotoDirtbikeCoyoteMini

Specification:Product Name: 3 GAL Air Horn Tank Compressor KitCondition: NewPackage Size: 60cm x 35cm x 25cm (LxWxH)Quantity: 1 setAir Compressor:Color: SilverMaterial: MetalSize: 24cm x 16cm (LxH)Voltage: 12VAmperage Draw: 23APlacement On Vehicle: Front,Left, Right200 PSI Air Compressor12V Permanent Magnetic MotorMaximum Working Pressure: 200 PSIWorking Pressure: 150 PSIFlow Rate: 1.7CFM @ 0 PSI4-Trumpet Air Horn:Color: BlackMaterial: MetalDecibel: 149DBVoltage: 12VPlacement on vehicle: Front,Left,RightTrumpet Size: 15cm x 34cm (LxH)Air Tank:Color: Black3 Gallon Air Tank KitCapacity: 3 Gallon (12 Liter)Maximum Working Pressure: 200 PSIWorking Pressure: 150 PSITotal Ports: 7Size: 55cm x 23cm (LxH)Features:1.Anti-Corrosion Coating,Precision Welded.2.This on-board system is designed for use with any high-pressure air horn that requires an on-board air system.3.Comes with a 3 Gallon air tank with 7 ports, a 200 PSI heavy duty compressor, pressure gauge, pressure switch, fuse, hose, fittings, thread sealant and mounting hardware.4.Oil-less design,moisture and Dust Resistant.5.Automatic reset thermal overload protector,mounting plates with vibration isolators.Fitment:Fit for all vehicles with a 12V system.Package Included:1 x Air Tank1 x Air Pressure Gauge1 x Pressure Switch1 x Safety Valve1 x Wing Style Drain Valve5 x Hex Head Male Plug1 x OD Nylon Plastic Hose1 x Fuse1 x Thread Sealant Tape1 x Rubber Ring4 x Screws(Big)4 x Screws (Small)2 x Screws (Minimum)4 x Nut (Big)4 x Nut (