Alpinestars Andes Touring, gloves Outdry

The revolutionized Tech 7 MX boot incorporates innovative materials and technology in a completely new design for a lighter, more anatomically profiled performer. This CE certified boot promotes core stability and flex via a biomechanical pivot while offering excellent ankle protection. The boot chassis has been designed to give complete feel and optimized interaction with bike controls, while the innovative buckle system allows easy, precise closure. Features
Boot chassis designed with an ergonomically profiled forefoot and lower toebox to provide easier shifting and improved rear brake feel and control. Incorporating an innovative one-piece injected dual compound foot shell with coinjected hard toe protector and integrated steel shank. The shell is highly resistant to abrasion and impact, adds to the boot’s overall durability and improves boot’s streamlining. New dual compound sole is seamlessly integrated into the base structure for superior durability, high performing rubber grip patterning, and feel. The sole and footpeg insert are replaceable. Upper constructed from innovative microfiber material that is flexible and abrasion resistant. Upper material is reinforced with PU for high levels of water-resistance and durability and improved weight-saving performance. Material ensures consistent fit even for long term usage and is easy to maintain and clean. Contoured calf protector plate is injected with high modulus polymer for impact resistance and incorporates Alpinestars’ developed blade flex systemfor greater precision control and movement, added protection for heel and Achilles tendon and helps prevent hyperflexion. New TPU ankle protection system incorporating a biomechanical link between the middle and bottom sections of the boot helping prevent damage to the leg by providing progressive force relief for torsional forces. Alpinestars developed TPU shin plate and medial protection are constructed from one single part for greater structural integrity and stability. The anatomically profiled shin plate features a dual closure system with an internal microfiber flap attached with Velcro® for a precise fit closure while the rugged and durable shin plate attached securely with a precision adjustable buckle. The TPU medial side panel incorporates an advanced honeycomb rubber insert and is designed for excellent grip against the bike while guarding against impact. Wide entry aperture for convenience and allows broad ranging calf fit adjustment and support. Innovative buckle closure system includes high-impact aluminium bridge closures, with memory settings and a quick release/locking system with self-aligning design for easy, precise closure and improved riding performance. All buckles are replaceable. Redesigned instep and Achilles accordion flex zones construction for superior comfort, control and support. Extended microfiber gaiter helps prevent excessive water and dirt entry. Internal lining includes anti-slide microfiber suede on the heel to help keep foot in position. Soft foam reinforcement on ankles and collar for long lasting comfort and shock absorption. New, dual compound, removable anatomic footbed includes EVA and Lycra top for comfort and support ensures even weight distribution and reinforced heel.

3in1 eye-catching touring jacket with lots of storage space Features
500 D Polyamide Hitena® reinforcements on crash zones (100% Polyamide) 3M™ Scotchlite™ reflectors AirVent ventilation zips detachable Humax® membrane: 100% waterpoof, 100% windproof, breathable detachable thermo lining SAS-TEC shoulder and elbow protectors according to EN 1621-1:2012 (protection level 2) elbow protectors are adjustable in height upgradable with back protector SAS-TEC SCL-S 19 for sizes 34 - 36 upgradable with back protector SAS-TEC SCL-L 19 for sizes 38 - 48 2 waterproof outer pockets, 1 waterproof inner pocket safety seams

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

The Fly glove will be discontinued but its closely related successor comes with advantages. The hard-shell knuckle and TPR finger knuckle protectors are covered with perforated goat skin, giving the entire glove a sleek and stylish look. PWR | shield knit has been added for extra safety. It now features the connect fingertip, allowing you to use your phone or navigation system without removing a glove.
Features
goatskin drum dyed karvin cowhide (PU coated) connect finger tip fabric perforated goatskin drum dyed goatskin covered hard-shell knuckle goat skin covered TPR finger knuckle protectors Temperfoam® PWR|shield knit adjustment tab fully perforated outer shell stretch lips elastic connect finger tip short cuff
Fit
tour fit

Weather type
Summer
Lining
Mesh
Visibility
Side Eye Night Eye
Ventilation
Mesh panels
Protection
backprotector prepared protector shoulder & elbows
Other specs
Coat hanger Jeans loop
* "lighter picture" shows the night eye effect

The Forcefield Upgrade back protector inserts are designed to replace existing back protector inserts and comply with the EN1621-2: 2003 Level 1 standard. With Nitrex® a unique high-tech shock-absorbing material, energy can be scattered and absorbed, and evenly distributed over the Nevertheless, the protector is flexible and comfortable. The materials used can withstand repeated impacts. A combination of technology and Multi Nitrex layers allows Forcefield to manufacture more lightweight and flexible protectors. This allows the body to move without being restricted. The unique triangular Nitrex grids have been designed to allow breathing holes at the base for breathability, and this also reduces weight. Features
Approved to: EN1621-2: 2003 Level 1 Protector strength: 15.5 mm