Faithfull Joiners Hammer 12oz

Paslode IM65 chisel point brads for Impulse IM65 F16 gas brad nailer. Electro galvanised light duty protection F16 gauge lost head 1.65mm wire brads glued, supplied with Paslode Special Impulse gas fuel cells which drives up to 1,000 brads per cell.Electro Galv: Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.

Liberon Bronze Liming Brush is made from long-lasting bronze bristles, which make it ideal for opening the grain of hardwood before liming. It is shaped so that it is comfortable to hold and use, and is suitable for cleaning heavy carvings, mouldings and stone. Performance- Opens the grain of hardwood before applying liming wax. - Perfect for cleaning heavy carvings, mouldings and stone. The LIBBLBRUSH has a weight of 1.36kg.

The Faithfulll Carpenter's Pencils lay down a clear visible line irrespective of surface or grain. With the exception of some metals and polished or glazed surfaces, almost any material can be marked out with these carpenter's pencils. The pencil has flat sides to prevent it from rolling away. There are three colour coded grades of hardness to cater for different surfaces. Supplied in a pack of three.Grade: Soft Colour: Blue For softwoods and newly felled timber.

Eliminación de terminales de engarce Kit de herramientas Reparación de cables Juego de herramientas con pelacables Engarzadores de alambre Destornillador de trinquete Terminal aislado

The Master Lock Lockout Gate Valve Cover has Zenex™ composite body, which withstands chemicals and extreme temperatures ranging from -57 ° C to +177 ° C. The cover completely surrounds the valve handle to prevent accidental operation. The unique patented rotating design allows for easier installation in confined spaces and insulated pipes. The Centre knockout can be removed for rising stem gate valves. Device can be locked with up to 2 padlocks. 'Danger DO NOT OPERATE' label supplied.Can lock valve sizes 50-125mm (2-5 in).

The DEWALT DCK654P3T XR Compact TSTAK­ Kit, contains the following: 1 x 18 Volt DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg. 1 x 18 Volt DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18 Volt DCS355 XR Cordless Oscillating Multi-Tool delivers up to 57 percent more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg. 1 x 18 Volt 125mm DCG412 XR Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18 Volt 165mm DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. No Load Speed: 3,700/min.Max Cutting Depth: 90 degree : 55mm, 45 degree : 42.1mm.Blade: 165 x 20mm Bore.Weight: 3.8kg. 1 x 18 Volt DCH273 Brushless XR 3 Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 Joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg.