22mm 7/8 Electric Hot Heated Motorcycle Grip ATV Warmer Handlebar

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

The Alpinestars C‐10 glove incorporates a hydrophobic textile outer and DRYSTAR® liner to keeps your hands dry while riding in the rain. Pre‐curved fingers and a knitted cuff ensure the glove is as comfortable as it is protective.
Features
Hydrophobic textile upper construction is lightweight and durable. Single layer, soft Goatskin palm construction provides abrasion resistance where it is needed the most. DRYSTAR® membrane insert is both waterproof and breathable, keeping the hands dry and comfortable. Over‐molded hard PU knuckle affords excellent impact protection. Additional protection provided by 4mm EVA foam padding on top of the hand and fingers. Pre‐curved finger construction reduces fatigue while riding. Accordion stretch inserts on fingers improves fit and comfort. Thinsulate® thermal insulation keeps hands warm.

Material
Elastic microfleece

100% very impragneted supple cow leather soft and smooth finishing Full removable winter lining, very breathable Padded reinforcements on elbows and shoulders connecting zip elbow and shoulder protectors, level 2 back protector included, level 2 Wrist-regulation by zip and snap 2 outside pockets, 2 inside pockets

Zum ersten Mal wird das historische Logo, ein stilisiertes Lenkrad, Ikone des MOMODESIGN Know-hows, auf den Helmen erscheinen. Ein einzigartiges Detail, das Wertigkeit und Markenidentität ausdrückt. Die Geschichte der MOMODESIGN Sturzhelme hat gezeigt, dass sie die Zukunft vorweg nehmen.Helmschale in 2 Größen. Helmschale Carbonkomposit aus dem Fluzeugbau. Lackierung mit speziellen Farben für erhöhte Wetterbeständigkeit. Innenfutter herausnehmbar und waschbar. Backenteile in unterschiedlichen Stärken. Das Innenfutter ist stark atmungsaktiv mit Netzgewebe und antibakterieller Silberionen Ausrüstung gegen Gerüche. 3D Gebogenes Visier mit Antikratzbeschichtung und UV-Strahlung Absorption bis 400 Mikrons (UV Filter) eingefasst mit echtem Leder und Seitenteilen aus Flugzeugcarbon. Von Hand zu bedienendes dunkles Sonnenvisier. Schnellverschluss mit Feineinstellung. ECE 22-05

Features Shell
HPTT ECE 22.05 GR 1550 ± 50 1 Shell Long, Oval
Visor
Twin Shield System Quick Release System Scratch Resistant UV Resistant Fog Resistant Anti Fog System Max Vision
Comfort
Removable & Washable Breathable Hypoallergenic Laser-Cut Foam Chin Curtain Breath Deflector Magna-Tech Liner
Security
Quick Release Strap Reinforced Chin Strap Reflective Safety Patch Multi-Density EPS Neck Roll
Ventilation
Channeled Ports Top Vent Chin Vent Exhaust Port
HPTT Is an exclusive process developed by LS2 researchers and named HPTT (High Pressure Thermoplastic Technology) a mix of polycarbonate is injected into moulds. The moulds used in this high precision industrial process are sculpted from blocks of metal weighing several amount of kilos. Twin Shield System LS2 s drop-down sun shield helps protect the rider s eyes from bright sun, and moves up and out of the way quickly and easily when entering dark tunnels, offering a more comfortable riding experience. Magna-Tech Liner LS2 use a small magnet to hold the neck roll securely in place while riding. Quick Release Strap The metal buckle attaches to a high quality safety strap. On the other strap is a ribbed plastic tab. Insert the ribbed plastic tab into the metal buckle. You ll hear a light "clicking" sound. Continue to slide it until you get a comfortable, snug fit. Pull the ribbon on the lever to release. For additional initial adjustment, use the metal slider buckle on the strap with the ribbed plastic tab to take up excess strap. Reflective Safety Patch To increase rider safety at night or in low visibility conditions the neck roll has a reflective safety patch that glows in the light of other vehicle s headlights.