A hexagonal bodied Rivet Snap with the working end heat-treated to ensure a long life.This tool is used for the forming of heads on solid rivets.Size 5 x 125mm (3/16 x 5 in)
The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from 25º to 155º and preset angle for 30º, 45º, 60º, 90º, 120º, 135º and 150º. The router working length at 90º is 915mm (36 inch), the circular saw working length at 90º is 780mm (30 3/4 inch). It has an angle tolerance ± 0.2º with zeroing facility, adjustable position alloy extrusion with scale and requires three clamps. Will accept accessory friction clamps Ref. VJS/CK or VJS/CK/L.
Calculations can be performed quickly and easily on the spot and results can be added or subtracted. It also has a practical Pythagoras function making it possible to measure lengths and heights indirectly. The Min/Max function allows continuous measurements. The pitch function allows measurements of predefined distances, for example for staking out fence posts. The last 20 measurement results are saved automatically. The body is fitted with a soft grip, making it comfortable to handle. For safety the laser beam is only activated after the switching on operation is repeated. It switches off automatically after three minutes without being used. Ideal for measuring areas on building, restoration and renovation jobs, also for landscaping the garden or for the accurate measurement of work pieces in the home workshop. Supplied in a practical bag for storage.
The Makita HM1317C Demolition Hammer offers high durability and excellent demolition performance. Suppression of motor speed during no-load reduces vibration of the tool body. The unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. Supplied with: 1 x Bull Point, 1 x Side Handle and 1 x Carrying Case. Specification: Input Power: 1,510W No Load Speed: 730-1,450/min Impact Energry: 21 Joules Shank Size: 30mm Hex Weight: 17kg Vibration Chiselling: 8.5 m/sec² Vibration K Factor: 1.5 m/sec² Noise Sound Power: 101 dB(A) Noise Sound Pressure: 81 dB(A) Noise K Factor: 2.4 dB(A)
The Forgefix Nyloc Hexagonal Nuts incorporates a nylon component to effectively lock the nut into position on the bolt. The nylon component has a smaller inside diameter than the actual nut. This locks the nut in place by squeezing the nylon firmly around the bolt when tightened. Unlike a standard locking washer, the Nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened. The nuts are zinc-plated for increased resistance to corrosion. Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so. APPLICATION: Where a permanent fastening is required and loosening must be prevented by movement or vibration. Can be used on most bolt products including HT Bolts, Carriage Bolts, Threaded Rod etc. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Nyloc Nuts & Washers Zinc Plated M4 Forge Pack 50
The Faithfull Post Hole Digger has a heavy-duty, all steel welded construction with large wide opening blades. It also has a compound scissor action, close the handles to close blades and thus remove the soil.