Omnitronic Konsolen-Mischpult LMC-1422FX Anzahl Kanäle:8 USB-Anschluss (10040280)

Die Powercon Datenverlängerungskabel sind eine schnelle und einfache Lösung für die Verbindung mehrerer Showtec LED-Effekte, Strips oder DMT LED-Bildschirme. Daten- und Netzkabel in einem! Nie wieder Kabelsalat! Die Powercon Datenverlängerungskabel sind erhältlich in verschiedenen Längen, damit Sie immer das passende Kabel für den Anschluss Ihrer Geräte finden, ohne am Ende zu viel Kabellänge übrig zu haben. Es gibt drei verschiedene Ausführungen der Verlängerungskabel: mit XLR-, RJ45- oder Ethercon-Anschlüssen. Vielleicht interessieren Sie sich ja auch für die vorgefertigten Strom- und Signalkabel von DAP. (FP0410, FP0510, FP0610, FP0810, FP0910, FP1010)

Passive Splitbox für Line Signale. Ein Modul besitzt 4 Kanäle. Jeder Kanal hat einen Eingang, einen parallel geschalteten Ausgang und zwei über Splitübertrager getrennte Ausgänge. Alle Ausgänge sind über Widerstände zusätzlich entkoppelt. Technische Daten Each channel Input: female XLR type Outputs: 1 parallel male XLR type, 2 transformer isolated male XLR type Nominal impedance for inputs/outputs: 600 Max. input level: +20dBu  

Features: Aluminum alloy housing design, low noise and stabilized voltage supply. A lightweight power supply with 1 input jack and 10 output jack. Powers eight 9V guitar effects, one 12V guitar effectsand one 18V guitar effects all at once without losing any signal intensity. Blue LED for power lights in normal using mode. When output jack has short-circuiting situation, thecorrespondingLED light go outautomatically.It goes in self-protection mode and it will auto-restart in about several seconds once you unplug the guitar effects. Foldback current limiting circuit provides ultimate protection against power shortages and overloads. The maximum current of No.1 to No.7 output jacks is 100mA for powering normal guitar effects. The maximum current of No.8output jack is 500mA for powering digital guitar effects and low power digital guitar amplifier. Adaptor of 100V-240V input and 18V output. Enjoy the quiet and cool operation of a fully regulated power supply. Connections: 1)Plug the included adaptor into 18V in jack. 2)Connect the adaptor to 100-240V power, the blue LED will light, if you use other adaptors, make sure the output is 18V rated at 1000mA and the plug is positive barrel and negative center type. 3)Connect your 9V guitar effects to the eight 9V outlets with included DC cables. 4)Connect your 12V guitar effects to the 12V outlet with included DC cables. 5)Connect your 18V guitar effects to the 18V outlet with included DC cables.

Features: Premium self-stick pads, reusable with longer service time. Non-woven fabric, comfortable and easy to peel off. Snap-on design, pad head diameter: 3.6mm or 3.9mm(for option) Compatible with most Tens, EMS, pain relief machines and electrotherapy devices on market. Provide maximum pain relief massage for you. Have 2 colors for you to choose: White, Beige Yellow.

Portable Mini mechanische Metronome Universal Metronom 11cm Höhe für Klavier Gitarre Violine Ukulele chinesische Zither Musikinstrument

The patented design of the BMS 4592 is a result of extensive dedicated research and development providing dramatic improvement in dynamic response, clarity and transparency. The BMS annular midrange diaphragm covers the frequency range between 300 and 7000 Hz with a smooth, linear response. The large diaphragm excursion of max. + / - 0,8 mm results in high output and increased power handling up to 1300 W peak. The ultra light annular diaphragm for the high range offers exceptional transient response with very high efficiency from 6 to 22 kHz. The unique voice coil technology employs a light weight Copper Clad Aluminium wire wound inside and outside of the Kapton? former to improve the heat dissipation, dramatically increasing the acoustic output and reliability of the driver while minimises the power compression. The use of high grade neodymium magnets provide improved performance while significantly reducing transducer weight. Technische Daten Extended Bandwidth (300 - 22000 Hz) Neodymium Magnet Assembly With two subsystems in one, each Driver covers a smaller Frequency Range for increased Power Handling, high Dynamic and extremely low Distortion Excellent Phase Coherence Perfect Time Alignment without Problems of Multi-Source Interference Ultra light Weight