Plasplugs YPS 472 Super Grips Fixings Yellow and Screws 20

The Paslode IM65 F16 Angled 16 Gauge Brad Nailer for all second fix applications. Improved design featuring key benefits such as an open magazine for easy brad viewing, and a vastly improved line of sight to enable increased accuracy during fixing. Fitted with a no-mar tip for accurate placement and reduced damage to the wood. Quick charge battery with an improved on/off battery system, the new quick charge, long life Lithium battery fires up to 6,000 brads on a single charge (1 hour); 200 brads in just 2 minutes charge. Quick start up with no power cables or air hoses required, the tools improve efficiency and safety in all environments against pneumatic tools. It offers optimal balance, allowing any user to manoeuvre into tight spaces and work all day long without fatigue. Keep one hand free with the improved belt hook design. Consistent finishing due to an improved adjustable depth of drive system, the tool allows seamless fixing without the extra time and cost of re-touching and re-finishing work. Supplied with: 2 x Li-Ion Batteries, 1 x Charger, 1 x High Impact Carry Case, 1 x 32mm Brad Pack, 1 x 38mm Brad Pack, 1 x 51mm Brad Pack and 1 x Cleaning Kit. Specification: Magazine Capacity: 100 Brads. Fires: Nail Length 16-63mm. Cycle Rate: 2-3 Brads/Second. Max Cycle: 1,000 Brads/Hour; 4,000 brads/day. Fuel Cell: Approx. 1,000 Shots. Battery: Lithium 1.25Ah: Up to 6,000 Shots. Charge Time: 1 Hour Max. Dimensions: 301 x 288 x 90mm. Weight: 2.1kg.

Precisión Rodamiento de servicio pesado Morse Eje cónico CHC Torno Centro Máquina de torneado de alta velocidad

A slimline design and soft-grip surfaces make for a comfortable, in hand fit. It also has an automatic spindle lock, which makes it easy to change tools, a 10mm quick-change drill chuck and an LED light to illuminate the work area.

E-Magnets Shallow pot magnets are low profile for applications where height is limited. They have a clearance hole through and a countersink on the magnetic face to accept a countersunk screw. Maximum operating temperature: 500°C.Material: AlnicoThe E-Magnets 827 Shallow Pot Magnet has the following specifications: Diameter: 29mm (1.1/8 inch). Height: 9mm (11/32 inch). Maximum Pull: 5kg (11 lb).

The Britool 12-point 1/2 inch sockets are crafted in chrome vanadium steel and finished in high chrome. The OGV® profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ASME B 107-1, ISO 1174-1.The Britool BRIE113702B Socket 12 Point Standard 1/2 inch Drive 7/16 inch has the following dimensions:Size: 7/16 AFLength: 38mmWeight: 45g

The DEWALT DCK654P3T XR Compact TSTAK­ Kit, contains the following: 1 x 18 Volt DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg. 1 x 18 Volt DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18 Volt DCS355 XR Cordless Oscillating Multi-Tool delivers up to 57 percent more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg. 1 x 18 Volt 125mm DCG412 XR Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18 Volt 165mm DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. No Load Speed: 3,700/min.Max Cutting Depth: 90 degree : 55mm, 45 degree : 42.1mm.Blade: 165 x 20mm Bore.Weight: 3.8kg. 1 x 18 Volt DCH273 Brushless XR 3 Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 Joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg.