USB Recargable Destornillador Eléctrico de Alta Precisión Mini Kit de Destornillador Portátil Teléfono Móvil Portátil Digital Herramienta de Mantenimiento en el Hogar

Hex Nyloc Nuts + Washers - Zinc Plated M4 (Pack 50)

$ 1,84

The Forgefix Nyloc Hexagonal Nuts incorporates a nylon component to effectively lock the nut into position on the bolt. The nylon component has a smaller inside diameter than the actual nut. This locks the nut in place by squeezing the nylon firmly around the bolt when tightened. Unlike a standard locking washer, the Nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened. The nuts are zinc-plated for increased resistance to corrosion. Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so. APPLICATION: Where a permanent fastening is required and loosening must be prevented by movement or vibration. Can be used on most bolt products including HT Bolts, Carriage Bolts, Threaded Rod etc. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Nyloc Nuts & Washers Zinc Plated M4 Forge Pack 50

-35%

Hammerite 'Direct To Rust' Metal Paint - Smooth Yellow 2.5L

$ 53,36 $ 82,09

-35%APAGADO

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 8 years. Specification: Colour : Yellow Finish : Smooth Size : 2.5L Coverage : 5m²/L

Weller Gas Soldering Iron Set - Piezo no gas

$ 55,56

Weller Butane Gas operated soldering iron set is suitable for all kinds of applications. The 3 function soldering iron allows the tool to be used for soldering, hot air and open flame with an operating time of 30 minutes. Features Piezo electronic automatic ignition system and gas capacity display. Supplied in a sturdy storage box.Gas not supplied. Use gas refill PGR1. Comes with: Solder, lead free 1.0mm Dia, 15g, Cleaning Sponge, 3 Soldering Tips: Conical 1.0 mm UND, 2.4mm Chisel Shaped, 2.4mm Plus 'Hot Knife' heat shrinking tip. Specification Max. Temperature Soldering Tip: up to 450°C.Hot Air Nozzle: up to 450°C.Open Flame: up to 1300°C.