O´Neal Rider Motocross Stiefel Orange 48

Alpinestars Core, leather jacket

The X-lite X-551 has become the X-lite X-551 "GT" (Gran Turismo). The use of latest generation fabrics for the new Touring Performance inner comfort padding and the redesigned configuration of the cheek pads have significantly improved comfort and fit. The look of the helmet has also been meticulously thought through.
Designed for riders of motard and street enduro motorbikes, but also ideal for dirt roads, the X-lite X-551 GT is available in three outer shell sizes and can be used in its full configuration or without the peak or the visor. It features a visor that is perfectly integrated with the design of the product, inner VPS (Vision Protection System) sunscreen and an efficient ventilation system.
The broad peak, designed for use on dirt roads, ensures adequate protection from the suns rays. Finally, the X-551 GT is equipped with a DD-ring retention system and is set up for the N-Com X-Series BX4 PLUS communication system.
Composite Fibre shell wind protector inner VPS sun visor, Fog Resistant Unitherm-Light inner lining Visor ready for Pinlock innovative ventilation system three different outer shell measurements for the six available sizes prepared for the n-com X-Series communication system Double D-Ring

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Outer garment
Gore-Tex laminated stretch fabric, waterproof and breathable
Memnrane
Laminated, waterproof and breathable Gore-Tex membrane
Insulating material
Removable thermo-lining 120g
Protectors
adjustable knee protection hip protection
Comfort
Regular fit Fixed mesh lining Connection zipper ventilation system Adjustable leg length Removable elastics on trouser legs Stretch on the knee

Specification:-Quantity: 1pc-Color: Black-Material: Polyester-To Fit: Rear Window/Side Window-Size: 102cm x 55cm (extensible size)Features:To prevent car agingApplies to all models!100% Brand new and high qualityFree to lift the window, Good ventilatingReceive a convenient does not occupy a space,foldableReduce the temperature inside the car, Effectively protect the interiorThe sun the mosquito net cloth, Shading of the mosquito again at the same timeNote:1. Please check the size measurement chart carefully before making payment.2. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cmPackage Included:1 x Car Window Sun Shade

This dual purpose pant is as happy on the road as it is on the trail. The Dual Raid pant is designed to protect you in whatever condition you find yourself. Don t plan your next expedition without it.
Features
500D Polyamide fabric with removable breathable, wind- and waterproof 3-layer DRYOsphere membrane Removable 3-layer DRYOsphere inner pant Breathable mesh lining Comfortable fleece lining inside the waistband Stretch panels for best action Climate comfort by ventilation system Double fabric layers for reinforcement at knee and bottom SAS-TEC protectors at knee Pocket for optional hip protector Hybrid knee protector pocket for two height positions Reflective elements for best visibility Synthetic leather reinforcements with embossing inside the knee 76cm long connection zipper 2 outer pockets Snap and hook closure Adjustments at waist and hem