Scott 350 S18 Track, textile pants kids

Features
Race Tape with Acerbis logo Size 1500Ft

K-1 is the new integral helmet from AGV, the successor to the K-3. The helmet is ideal for those looking for a sporty design and good value for money. Features
Outer shell made of thermoplastic resin, high strength and very light 2 outer shell sizes for a perfect fit EPS (inner shell) in 3 sizes and 4 densities, for optimal shock absorption The shape of the helmet has been designed to reduce the forces of impact on the collarbone The ventilation system consists of air intakes top, in the chin rest and has a spoiler on the back with exhaust fans excellent aerodynamics and optimal cooling inside. The ventilation was optimized with the help of CFD (Computational Fluid Dynamics) The new rear spoilers have been tested in the wind tunnel, provide high aerodynamics and stabilize the helmet at high speeds XQRS (X-tra Quick Release System): replacement of the visor without tools and in a few seconds possible Lining without stitching on the most sensitive areas Sanitized (antibacterial) lining, 2Dry (for excellent absorption of moisture) and Microsense The removable lining is removable and washable Padded side panels optimized for wearers of glasses Locking system with buckle Weight: 1.49 g +/- 50 gr (in size MS)

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.

Schweißableitendes Tragegefühl mit weiblicher Passform! Das Nike Dry DFC Crew Tee Women ist ideal für jedes Workout. Es liefert ein auf Performance ausgerichtetes Tragegefühl schweißableitenden Materials. Seine feminine Silhouette kombiniert ein geripptes U-Ausschnitt-Design mit einer schmeichelnden Passform. Größenauswahl-Hilfe: Model mit 170 cm Größe und 60 kg Gewicht trägt Größe SGrößenauswahl-Hilfe: Model mit 161 cm Größe und 72 kg Gewicht trägt Größe L Eigenschaften: Material: 57% Baumwolle / 43% PolyesterPassform - Fit: Körpernah und lang geschnitten Größenflag: Fällt normal aus Pflegehinweise: MaschinenwäscheDri-FIT Cotton: Das Nike Dry-Material hält trocken und sorgt für TragekomfortRipp-Einfassung am Rundhalsausschnitt Weiches Textil-Webband innen am Nacken und über die Schulter verlaufend sorgt für einen angenehmen Tragekomfort Swoosh Logo auf der Vorderseite aufgedruckt

Caberg JUSTISSIMO/JUSTISSIMO GT, visor

Description: Features: The hat is very durable and fashionable. It has unique beautiful and a cool design. It is breathable,comfortable and adjustable. It is very convenient for your out-door exercise. It is a perfect accessory for you to match many different style clothes. Specifications: Material: Cotton Type: Baseball hat Gender: Men/women Color: Black/white Circumference: About 55-62cm/21.6-24.41in(adjustable) (1cm=0.39inches) Note: 1. Due to the light and screen difference, colors of th