Features:
With electronic compass and barometer.
SP Racing F3 Flight Control With Integrated OSD for Multicopter.
The SPR F3 builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails.
ST debug port on the back of the board have(SWD) and startup mode selection, not deadlock bootloader.
There MEGA328 ISP port on the back of the board, will not deadlock bootloader.
Looptime up to about 2 times the previous generation based stm32F1 flight control.
Use all the features all the time. Connect your OSD + Smartport + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time.
The SP F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI(Windows/OSX/Linux).
Tiny and lightweight.
On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork.
STM32 F3 support next-generation processor attitude efficient hardware floating-point operations, and faster ARM Cortex M4 core computing.
All using 2.54 interface.
PDB can be more perfect combination.
Full support for OneShot ESCs for easy PID tuning and a sharper response.
Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
Dedicated output for programmable LEDs - great for orientation, racing and night flying.
Battery monitoring ports for voltage and current.
Sonar support for precision low-altitude hold.
I2C port always powered, perfect for external sensors or always-on OLED screen.
Buzzer port for audible warnings and notification.
F3 + OSD run the company to modify the optimization of cleanflight flight control software(FC).
This DeltaWing Presentation Car Diecast Model Car is Red and has working wheels and also comes in a display case. It is made by Bizarre and is 1:43 scale (approx. 11cm / 4.3in long).
This Honda Civic Type R (2017) Resin Model Car is Aegean Blue and features comes in a display case. It is made by TrueScale Miniatures and is 1:43 scale (approx. 10cm / 3.9in long).
This CAT 854K Wheel Dozer Diecast Model Tractor is Yellow and features working articulated body, blade, wheels. It is made by Norscot and is 1:50 scale (approx. 27cm / 10.6in long).
This Gordini T32 (Andre Pilette - Monaco GP 1956) Resin Model Car is Blue and features comes in a display case. It is made by Spark and is 1:43 scale (approx. 10cm / 3.9in long).
This Jeep Rescue Concept Dirt Rider Diecast Model Car is Black and features working steering, suspension, wheels and also opening bonnet with engine, doors, tailgate. It is made by Maisto and is 1:18 scale (approx. 26cm / 10.2in long).
