Authentische LostVape Triade DNA250C 300W TC VW APV Box Mod - Gunmetal-Rahmen - Schwarz-Grau Kevlar

The iStick Tria, a new powerful mod by Eleaf, accepts triple 18650 batteries and is capable of firing up to 300W, allowing a much more massive vapor production than ever. The overall compact profile and stylish visual appeal of the iStick Tria make this powerful vape mod stand out from others. The ELLO S atomizer features retractable top for easy e-liquid filling and comes with HW coils for great vaping experience with enhanced flavor. Having 0.91-inch screen, upgradeable firmware, 2A quick charge and reverse charge capabilities, this full-featured iStick Tria with ELLO S is a must have vaping setup for cloud chasers. Powerful Output of 300W Powered by triple 18650 batteries (battery not included) 0.91-Inch Screen with Triple Battery Bars Stay Stylish and Modern All parts of the ELLO S tank can be detached and reassembled, much more convenient to clean Convenient Retractable Top Fill 2A Maximum Charging Current for Quick Charge Battery Balancing Trickle Charge System The iStick Tria with ELLO S comes with powerful HW coils: HW3 Triple-Cylinder 0.2ohm Head and HW4 Quad-Cylinder 0.3ohm Head for cloud chasing. Extendable for Larger E-liquid Capacity Preheat Function & Switchable Interfaces The iStick Tria can handle tanks up to 25mm diameter without any overhang. Dual Circuit Protection & Reverse Polarity Protection Reverse Charging Capability: convert the 510 connection into a USB output for power bank mode, providing power to your cell phone or other e-cig device. Charging: The 18650 batteries can be charged in the iStick Tria through the side USB port via wall adapter or computer or charged with an external battery charger. Firmware upgrading: The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable. Brand: Eleaf Quantity: 1 Color: As Shown Size: 41mm x 41mm x 114mm Weight: 177g Output Wattage: 1-300W E-liquid Capacity: 2ml (Extendable to 4ml) Maximum charging current: 2A Maximum output current: 50A Thread type: 510 thread Battery type: high-rate 18650 battery (Continuous discharge current should be above 25A) Output mode: VW/TC(Ni,Ti,SS,TCR-M1,M2,M3) Resistance range: 0.05-1.5ohm (TC modes) ; 0.1-3.5ohm (VW mode) Temperature range: 100£­315¡æ/200£­600¨H(TC modes)

These Kanthal A1 coils are perfect for advanced vapers who may not have the time to build, or any vapers looking to experience the quality vaping experience that comes from the more advanced coils. Name: Pre-made Coil Wire Model Tsuka Size 1.8 x 8mm; Inner: 3mm Resistance 0.25ohm Quantity 10

Marke: LIQUID Typ: E-liquid Netto: 50ml Flavor: Tobacco Nikotingehalt: 12mg (1.2%) Nikotin-St?rke: Medium PG: 50% VG: 50% Anzahl: 1 Net Weight: 61.5 g/ 2.17 oz Size: 90 x 33 x 33 mm/ 3.54 x 1.30 x 1.30 inch

Vandy Vape Pulse BF 80W Squonk Box Mod is a collaboration by Vandy Vape and Tony B. The new Pulse BF Mod is no longer a mechanical mod, but a regulated mod with built-in Vandy chip, which is also used in Voopoo Drag and Alpha One. With 80W maximum output and 8ml bottom feeder bottle, Pulse BF 80W Mod will bring you better squonking experience. Powered by Vandy chip 0.91 inch OLED screen 8ml silicone bottle 95% working efficiency Supports vaping while charging 0.010 second firing response time Gold plated battery contacts Tactile firing but ton Easy grip squonk bottle Interchangeable dual magnetic battery panels 510 connector with the creative leaking proof design 2A Micro USB rechargeable Protections: short circuit, over-current, switch timeout, over-heat, over-charge, over-discharge Powered by 1x 18650/20700 battery (sold separately) Temperature range at 200-600'F/100-315'C Firmware upgradeable Brand: Vandy Vape Variable Wattage 1-80W Input Voltage 3.2-4.2V Output Voltage 0.5-8.5V Output Mode VW/TC-Ni/TC-Ti/TC-SS316/M1-M5/TC-NC/TCR Resistance Range 0.05-3ohm(VW) / 0.05-1.5ohm(TC) Size 82 x 56 x 27mm

Produkt-Eigenschaften: Diese Spulen sind perfekt f¨¹r fortgeschrittene vapers, die nicht die Zeit haben, zu bauen, oder jeden vapers suchen, um die Qualit?t vaping Erfahrung zu erleben, die von den fortgeschritteneren Spulen kommen. Produktspezifikationen: Name: Widerstandsdraht Spule AWG 26GA * 3 + 38GA Kabell?nge 10 Fu? Dr?hte Menge 3 Packungsinhalt: 1 x 10 Feet Draht 1 x T-f?rmigen Phillips-Schraubendreher 1 x Coil Jig

Produkt-Eigenschaften: Die Advken Manta RTA ist ein 24mm Durchmesser reparierbaren Tank Zerst?uber mit einer 3 ml Kapazit?t und eine 4,5 ml Kapazit?t mit dem Blasentank. Der Manta mit einem praktischen oberen F¨¹llsystem Design ausgestattet ist, vergoldeten Pfosten und unteren Luftstrom einstellbar. Die vergoldeten Pfosten gestaffeltes Polklemme mit einem direkten Luftstrom darunter gestapelt sind, so dass Geb?ude einfach, flexibel und ?ffnet eine Variante von Spulen in dort zu setzen. Es gibt drei verschiedene Optionen f¨¹r den Benutzer Luftstrom, vollst?ndig ge?ffnet, zwei oder ein Benutzer die ultimative Kontrolle f¨¹r Vorzug zu geben. Mit einer flexiblen und einfachen Geb?uden Post, eine bequeme Top-fill-F?higkeit f¨¹r Ihre Lieblings-E-Fl¨¹ssigkeit, wird der Advken Manta 24mm bietet immer gro?e Dampfproduktion und Geschmack. 24mm RTA 810 PEI Tropf-Tipps Dual Coil-Design mit Curved Beitr?ge Top Refill-System mit Big Nachf¨¹lllochverschluss Vakuum-Gold ¨¹berzogene positive und negative Beitr?ge Air-Flow-Control System (3 Adjustable Air Flow L?cher im Boden mit 1 Loch im Positiven Post) 3 ml f¨¹r normales Glasrohr und 4,5 ml f¨¹r Chubby Glasrohr Produktspezifikationen: Marke: Advken Modell MANTA RTA Kapazit?t 3 ML / 4,5 ml Durchmesser 24MM Gr??e 46 x 24mm Gewicht 50 g Packungsinhalt: 1 x Advken MANTA RTA (810 PEI Drip Tip) 1 x Reinigungstuch 1 x Ersatz Normale Glasrohr 1 x Alien-Schraubendreher Zubeh?r Tasche