Masterlock 8.25M Ratchet Tiedown + J Hooks

The D2400 has a stainless steel rail system that is integrated into the saw frame ensuring accurate cuts. A cantilevering rail system allows for 610mm ripping capacity. It also incorporates a plunge function with an integrated 45°/22.5° feature for quick angle cuts. This allows the user to make plunge cuts for electrical outlets. Side and rear water attachments can be placed on the tile saw to catch overspray, keeping water in the pan. In addition to this the dual water nozzles can be adjusted for optimal water placement on the blade in order to minimise overspray and mist.   The compact lightweight design is great for transportation and has an easy one person set up. With handy features such as and easy edge guide with 2 positions (90° and 45°) for corner cuts and a removable cutting cart for easy cleaning, this DeWALT tile cutter is a great for personal or professional use.

Record Irwin V150B Woodcraft Vice is lighter in construction than the standard woodworking vices, this useful portable vice can be attached to most working surfaces by means of a 2.1/4in capacity integral clamp. Provision is also made for the body to be screwed permanently to the bench if required. High quality cast body fitted with carefully aligned steel slide bars and main screw. Jaw Width. 150mm (6in).Jaw Opening: 115mm (4 1/2in).

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

Miniatura de aluminio pequeña Hobby Clamp en mesa Mini herramienta multifuncional

Faithfull versatile flexible sanding pad, double sided and washable, can be used on wood, paint, metal and plaster, wet or dry and even with chemical paint strippers. Pack of 10.Ultra fineColour - grey

These Faithfull Utility Paint Brushes are made from a mix of natural and synthetic bristles and are suitable for use with all types of paint. The brushes feature a rust-resistant ferrule and a contoured handle for greater user comfort.Set of 5 one each of 19, 25, 38, 50, 60mm (3/4in, 1in, 1.1/2in, 2in, 2.1/2in)