These Forgefix Screw Cup Washers have a solid brass finish to avoid corrosion. They are quick and easy to install, with no need to countersink screws. APPLICATION To enable flush finish in numerous joinery installations. Can be used with most screw types.Screw Cup Washers Brass No.8 Forge Pack 20
15pcs Práctica del acero inoxidable que abre las herramientas de la selección de la cerradura Set Kit del entrenamiento de Lockset con el candado cristalino transparente para los principiantes del cerrajero
Nut Splitters are used for removing rusted on nuts from studs etc.A spanner is used to turn the hexagon end which has the effect of forcing the chisel end into a flat of the nut, forcing apart without damage to the thread of the stud.Size 19 to 27mm
The Batavia Giraffe Air Telescopic Ladder is a practical, lightweight ladder for all purposes. It can be used everywhere and always has the right length. It features patented finger protection via gentle retraction. This ladder is easy to transport and is adjustable to optimal height. It has a TÜV/GS tested (quality and security) Grid-Lock system. Its compact design means it requires little space for storage. Supplied with a stabiliser bar. They are rated to EN131-6/GS Standard, and have a 150 Kilo rating.
The band clamp is suitable for assemblies made of wood, plastics and non-ferrous metals, but it can also be used with ferrous metals when firm all-round clamping which will not damage or distort the work is required. Because the tape is tightened evenly from both sides, pressure is uniformly distributed all round or at each corner, thereby preventing distortion on one side. Self locking occurs automatically as the strap is tightened. This ensures consistent tension, which is maintained until the strap is released. The Vario-angle adapt automatically and infinitely variably to any angle from 60° to 180° . Clamping Range Up to 7mBand Width & Depth 25mm x 1mm Angle 60 / 80 DegreesWeight: 0.53Kg
The Makita HP2071F Percussion Drill is fitted with a high power motor but packed into a slender and compact body with durable metal gear housing (with a keyless chuck). The new reversing system allows extended service life of carbon brush and no power reduction even in reverse rotation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is supplied with a side handle, depth stop and a carry case. Specification: Input Power: 1,010W No Load Speed: 0-1,200/0-2,900/min Impact Rate: 0-24,000/0-58,000/bpm Capacity: Steel 18mm, Masonry 20mm, Wood 40mm Weight: 2.4kg Vibration Hammer Drilling : 16 m/sec² Vibration K Factor : 1.5 m/sec² Noise Sound Pressure : 99 dB(A) Noise Sound Power : 110 dB(A) Noise K Factor : 3 dB(A)
