The Milwaukee PLH 20 SDS-Plus L Shape Hammer is a 2 mode drill - hammer drilling and rotary drilling - for maximum versatility. It has an SDS-plus chuck, with optimised hammer drilling at 5 – 12 mm. It has a forward and reverse mechanism. The PLH 20 features motor cooling airflow that is designed in a way that blows drilling debris away from the user when drilling overhead. A safety clutch protects user and machine if the drill bit jams. The drill has AVS (Anti-Vibration-System) to provide more comfortable use and less strain. The soft-grip handle and ergonomic 2-finger trigger with variable speed control increase the comfort further. Supplied in a kitbox. Specification Modes: Hammer Drilling, Rotary Drilling. Input Power: 620 Watt. No Load Speed: 0-2,700/min. Impact Rate: 0-4,400/bpm with 2.0 Joules. Capacity: Concrete: 20mm, Steel: 13mm, Wood: 30mm. Chuck: SDS-Plus. Cable Length: 4m. Weight: 1.9kg.
The Wera 3334 flared slotted series screwdrivers have a blade manufactured from stainless steel, yet equally strong as conventional steel screwdrivers. They are ideal for industrial applications as they prevents extraneous rust forming on stainless steel fastenings due to contamination. The Wera lasertip grips into the screw head for safer screwdriving and less effort. The multi component Kraftform handle is uniquely designed around the hand during screwdriver use, reducing fatigue and increasing speed. Soft zones offer improved grip, hard zones allow easy hand repositioning.Size 8.0 x 175mm
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
The Paslode IM65 F16 Angled 16 Gauge Brad Nailer for all second fix applications. Improved design featuring key benefits such as an open magazine for easy brad viewing, and a vastly improved line of sight to enable increased accuracy during fixing. Fitted with a no-mar tip for accurate placement and reduced damage to the wood. Quick charge battery with an improved on/off battery system, the new quick charge, long life Lithium battery fires up to 6,000 brads on a single charge (1 hour); 200 brads in just 2 minutes charge. Quick start up with no power cables or air hoses required, the tools improve efficiency and safety in all environments against pneumatic tools. It offers optimal balance, allowing any user to manoeuvre into tight spaces and work all day long without fatigue. Keep one hand free with the improved belt hook design. Consistent finishing due to an improved adjustable depth of drive system, the tool allows seamless fixing without the extra time and cost of re-touching and re-finishing work. Supplied with: 2 x Li-Ion Batteries, 1 x Charger, 1 x High Impact Carry Case, 1 x 32mm Brad Pack, 1 x 38mm Brad Pack, 1 x 51mm Brad Pack and 1 x Cleaning Kit. Specification: Magazine Capacity: 100 Brads. Fires: Nail Length 16-63mm. Cycle Rate: 2-3 Brads/Second. Max Cycle: 1,000 Brads/Hour; 4,000 brads/day. Fuel Cell: Approx. 1,000 Shots. Battery: Lithium 1.25Ah: Up to 6,000 Shots. Charge Time: 1 Hour Max. Dimensions: 301 x 288 x 90mm. Weight: 2.1kg.